Jump to content
SAU Community

Recommended Posts

Lotus cars has donated a brand-new Exige to the Bankstown, NSW police force. The six-month loan gives the local constabulary a head-turner that it plans to leverage in community policing projects, particularly with regard to reaching out to local youths and car enthusiasts. The thinking is that the Exige will be an instant conversation-starter with both groups, and that, in turn, will enhance the police department's credibility with them.

Full article:

http://www.autoblog.com/2007/02/16/lotus-d...ice-department/

Link to comment
https://www.sau.com.au/forums/topic/156727-lotus-exige-cop-car/
Share on other sites

"We are also very conscious of environmental issues and keen to demonstrate ways of using less fuel with more economical performance cars.

Haha, wait until the find out how often you have to service it and how much that's going to cost :happy:

Lovely cars, I'd own one in a heartbeat but they're not a fleet vehicle.

Thats so cool. Lets just hope that it goes everywhere, schools, tracks, drag strips and the guys driving it are cool and a good face for the service.

...and i cant help myself. Bankstown? LOL..it wont last the 6 months without someone vandalising it or trying to steal it .

'good to see my tax money being used so wisely'

It wasn't purchased with tax payers money, apparently it was given to the police force from lotus if you read the article. THANK GOD because i was just complaining to my gf about our tax payers money going to waste as well haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...