Jump to content
SAU Community

Team Cheater Evo Ftw! :)

matlowth

By matlowth,
in Victoria

 Share

Recommended Posts

matlowth Proficient

matlowth

Posted
Posted

Well I finally dyno tuned the evo last night @ RE Customs - Mods are additional boost, APC Exhaust and Ralliart filter.

Final result - 229.1awkw - I'm VERY happy with how it turned out to say the least. Mixtures are nice and rich (11.5ish:1), and it pulls like a freight train through every gear.

I tuned it myself using a combination of ECUFlash, EVOScan and Dataloglab (fairly cheap tools)

Best part - I ran my car there when it was standard, and it made 147awkw - so it's picked up 82awkw over stock.

After finishing the dyno tuning, I ran 4 4th gear pulls back to back and they were all within 1-2kw of each other, with no signs of the engine starting to pull timing.

I've got to say - a BIG thanks to Ray from RE Customs for use of the dyno (and operating it) whilst I was tuning - he's a top bloke, and as everyone else has said, I'd definitely recommend him!

Cheers,

matt

2291at0.th.jpg

Link to comment
https://www.sau.com.au/forums/topic/166261-team-cheater-evo-ftw/
Share on other sites
Jamezilla Grand Master

Jamezilla

Posted
Posted

Top work Matt!

I was sceptical at first - but so amazed at how quickly you could change things on my car. I think the case-of-beer and some dyno time needs to certainly slide in before 12th May...

matlowth Proficient

matlowth

Posted
  • Author
Posted

No probs - I'm going to be down there next week tuning my brothers car too. Maybe do yours at the same time if you're not busy?

Top work Matt!

I was sceptical at first - but so amazed at how quickly you could change things on my car. I think the case-of-beer and some dyno time needs to certainly slide in before 12th May...

saff_cossie Grand Master

saff_cossie

Posted
Posted

Fantastic work mate!

Looking forward to upping the boost a bit now on mine :P

It pulls very nicely through to 7K and exhaust smells richer after the remap too. Idle is fine and as is all the other bits. Good job Lowthy :P

GTRgeoff Grand Master

GTRgeoff

Posted
Posted

Nice work Matt. Makes me feel underwhelmed by my 320rwkw@14psi in the GTR33.

Jokes aside though, I'm looking forward to doing the DIY thing on the GTR and the GTS25t with 26/30. Such a sense of satisfaction, now get rid of it and go Nissan..... you know it's the only way to credibility.

BTW Vic members, my new fridge has 200hp, more than most 20's ....... even more than GOLGO too I expect. :(

post-6392-1177669967.jpg

AutoTrust Mentor

AutoTrust

Posted
Posted

That's an awsome result, I have no idea what you tuned it with, sounds like software.... any hardware there? DIY rocks!

I haven't tuned a car for years, last time was on an unfamiliar dyno on a VL turbo with a Gas Research system that you can tune with a vice and a metal file!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...