Jump to content
SAU Community

Recommended Posts

Only the very late Skyline Series 2 models had the CAS (crank angle sensor) of the next to come R34.

(identified by the black back plastic cover)

These CAS only matched the slotted camshafts, which were different from Series 1 and early Series 2 (mid 1997 or so)

So early Series 2 and Series 1 should have the same camshaft ....

Yes I have the black CAS on my 40th anniversary.

I'm assuming this means that these late S2's must have the cams from the NEO engine then....or at least on the 'zaust side. Are they the same profile? I assume so but don't know?

The 40th anniversary edition also has special badges on the outer B pillar and badges on the seats.

I've also heard that Kozo Watanabe himself cast the special badges from the melted down samurai swords of ancient samurai warriors, and that each car was blessed by a Shinto Priest as it left the production line?

Hmmm ... dunno ..

Do the Neo cams plug into the RB25DET head?

The Neo has solid lifters though ..

Yes I have the black CAS on my 40th anniversary.

I'm assuming this means that these late S2's must have the cams from the NEO engine then....or at least on the 'zaust side. Are they the same profile? I assume so but don't know?

Hmmm ... dunno ..

Do the Neo cams plug into the RB25DET head?

The Neo has solid lifters though ..

It would mean that Nissan would have had to machine a special 'zaust cam for the S2 GTST to accept the black (Neo) CAS.

Why the hell do that when they could just have used the normal CAS on the normal cam?

I've never opened the head yet, it might have neo lifters for all I know. Not many cars had the black CAS.

Edited by Tony de Wonderful

Are you sure, i thought S1's didnt have an airbag option and S1.5's came with drivers side standard and passenger as an option and S2 had both standard?

Yeah i have a 94 series one with both drivers and passenger airbags, id love to find the history of the car

  • 3 months later...

SkylineGold.jpg

What's this with red or silver badges on the front?...my 95 turbo coupe has a gold badge on black mesh below the bonnet.

I also have a Series 2 Motor!

Edited by stewart1
  • 2 weeks later...

Hi guys does anyone knows If there is any difference between s1 and s2 gbox? And is there any way to tell which one is s1 and which one is s2?? Need answer asap so if anyone knows just send me a message on 0415440332 :) thanks in advance

  • 5 months later...
  • 2 weeks later...

I've also heard that Kozo Watanabe himself cast the special badges from the melted down samurai swords of ancient samurai warriors, and that each car was blessed by a Shinto Priest as it left the production line?

Only if ancient Samurai warriors used plastic swords lol.

Yeah i have a 94 series one with both drivers and passenger airbags, id love to find the history of the car

Not too sure on this one but it must have been an option. I have an S1 dash out of a 94 model and looking at the back it has all the mounting points and the outline for where the passenger airbag goes.

What's this with red or silver badges on the front?...my 95 turbo coupe has a gold badge on black mesh below the bonnet.

Gold badges were a tick the box option. All badges could be optioned in gold separately. Bonnet badges, boot badges, GT badges, Navan badges etc.

  • 1 year later...
  • 2 months later...

Q; What is the difference between a series 1 and series 2 R33 Gtst?

A; There are several differences...

  • Mechanical differences include an updated ECU and a ceramic turbo.

whats the difference in the turbos?

cheers

whats the difference in the turbos?

cheers

I've forgotten a lot of my r33 info over the years but I do know that the series 2 compressor is ceramic as opposed to metal. I think the sizes are the same though.

  • 1 month later...

I've forgotten a lot of my r33 info over the years but I do know that the series 2 compressor is ceramic as opposed to metal. I think the sizes are the same though.

i thought the s2 ran a ceramic turbine and a high temp nylon compressor wheel. S1 is alloy.
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...