Jump to content
SAU Community

Recommended Posts

Q; What is the difference between a series 1 and series 2 R33 Gtst?

A; There are several differences...

  • The front end of the series 2 is sharper, slimmer headlights, different front bar (indicators and fog lights are round and located at the bottom of the bar). The bonnet has much sharper ridges.
  • The "skyline" panel at the rear of the car is body coloured on the series 2.
  • The interior of the series 2 has been updated including different trim, a passenger airbag and the dash facia has been updated.
  • Mechanical differences include an updated ECU and a ceramic turbo.
  • The series 1 was in production from late '93 through to late '95. The series 2 ran from early '96 through to early/mid '98.

Link to comment
https://www.sau.com.au/forums/topic/17349-r33-gts-t-series-1-and-2-differences/
Share on other sites

  • 8 months later...

Also the S1 has an ignitor located on top of the motor at the back on the rocker cover near the firewall, whereas the S2 has the ignitor built into the ECU. Another small differance is the headlight backings, where S1 has black backing and S2 has chrome backing.

  • 1 month later...
  • 3 weeks later...

There are some similarities though, i believe the 'different wing' on the Series II (think it's called an M-Spec?) also appeared on some of the series I (or 1.5) 33's as well. Plus the other day i saw the lower stock R33 Series I wing on a car that had the Series II skyline imprint on the boot, and not the panel of plastic. This may have been custom though.

here is something else for you, in 1995 there was a series II also, it had the series I front, but had the series II engine, dual airbags, colour coded rear skyline badge, updated interior, different seat trim to 93-94, not the same as 96, series II instrument panel, series II floor mats.

  • 3 weeks later...

Here's what my '95 R33 has, which is still a bit different again. Not sure when it was made other than 1995.

Series 1 - front bar, steering wheel, with airbag, interior (velour) but with updated pattern (not quite as dark), rear badge (clear plastic and silver letters, not colour coded).

Series 2 - wing, engine, boot lid badge (titanium)

??? - instrument cluster (I wouldn't know the difference), suspension

??? - grille (which I quite like) that's kind of like a rounded GTR grille rather than the slat style of most that I've seen. I think this was just a factory option though, I've seen very few around, and some '95 models with the slat grille.

NO passenger air bag

And while we are dumping shit on other people's Skylines, I would just like to say that the indicators on the Series 2 front bar look like huge blocks of Lego (blerghhh!) :)

everyone mixes answers to which turbo is which up

this is the difference.

the series one AND two exhaust wheels are ceramic, and prone to delaminating from the shaft, due to excess heat and resistance, resulting in bits of tubo stuck in your cat :)

The difference is in the intake side.

The intake wheel of a series one turbo is steel, where in a series two (and even r34 gtt) has a nylon wheel. this results in a quicker spool up.

the problem is not with the intake side of the turbo, its the exhaust, so if you had to compare the two, the series 1 turbo is no less likely to fail than a series 2 turbo.

Ive just about finished putting a motor out of a series 1.5 into my series 1.

dunno if anyone cares, but the clips for the coil packs are a bit different, so i had to swap them and the harness from my blown series one motor and put them in the series two, but again, dont know if anyone cares about something so trivial...

  • 4 months later...
  • 3 weeks later...

i know i've gone thread digging but i wanted to know if anyone has heard of a series 2 being made in 1995. not a series 1.5 but a full series 2??? and do people commonly find importers reffering to 1.5's as series 2???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...