Jump to content
SAU Community

Recommended Posts

i have bought a turbosmart type2 veeport bov and installed it on my skyline.

now my car keeps stalling and ive followed the instruction and tightened the spring but it still stalls,we have checked over it and theres no leaks,no blockages and no collapsed or twisted hose.

i got the spring as tight as it could go and it still stalled so i ended up taking it off and put the factory part back on and it runs perfect and doesnt stall and now i have wasted $400 on the adapter and bov.

im confused to why it stalls,hope yous can help me out.

The car is overfuelling due to the ATMO BOV.

The car expects the re-circ BOV to be there, its tuned for it.

Hence when you put it back it works fine.

So you have two choices.

Get a ECU & tune it ($1500)

Or go back to the stock one... which is is how Nissan intended it to be :D

Nothing wrong with the stock BOV so not really sure why you would want to change it anyhow.

The car is overfuelling due to the ATMO BOV.

The car expects the re-circ BOV to be there, its tuned for it.

Hence when you put it back it works fine.

So you have two choices.

Get a ECU & tune it ($1500)

Or go back to the stock one... which is is how Nissan intended it to be :D

Nothing wrong with the stock BOV so not really sure why you would want to change it anyhow.

thanks for the info.

im having the same problem with my turbosmart BOV but i have set it up so its set to recirc and its still stalling i have no idea whats goin on with it and im looking at being in the same boat as blitz becuz im gunna have to put the stocker back on or get an aftermarket ecu and tune (better start saving lol)

installing a HKS Fuel Cut Defender should override this problem? i think.

i experienced the same with my Blitz. I didnt mind the stalling every now and then, but i removed it to avoid the boys in blue.

The stock one does its job well enough!

as previously mentioned.. maybe investigate if you can adapt that BOV back to a plumb back .

also vac leaks can be quite hard to track down .. make sure you look for cracks at the places where other pipes join the inlet ( if there are any )

to be honest I was really impressed by the stock recirc valve on the rb25det NEO .. looked very well made! and at least if you have a recirc BOV the boys in blue have got one less thing to bend you over for !

and if you have a pod you should still hear the BOV noise.

ive heard alot of specualtion, but how much boost can a standard r32 gtst bov handle?

has anyone had a problem running 17-18 psi thru one?

im ready to put my stocka back on and see if it helps with the stalling..

ive heard alot of specualtion, but how much boost can a standard r32 gtst bov handle?

has anyone had a problem running 17-18 psi thru one?

im ready to put my stocka back on and see if it helps with the stalling..

From what I've read on SAU, the standard 32 gtst bov can handle about 14psi before it starts to leak if I remember correctly. If you want to run the standard plumb back system, I think you can just get the GTR's bov and put it in its place. They handle up to about 20-ish psi.

Feel free to correct me.

Its wierd mine has worked fine on the car and it has never stalled. Might change it back just cos it gets annoying sometimes. Did you make sure you used the gasket between the bov and the intake pipe?

  • 8 months later...
  • 16 years later...

My tuner told me this as well that the reason the car will stall is because it has a AFM system, he said it I want to do it properly I need to delete that system, he said I can try it though to see how it goes. My BOV recirculates btw (can hear flutter sometimes though), how do s15's and stuff not stall and they also have the AFM system? I was considering blocking it off for ovbious reasons but was hesistant because of the above.

1 minute ago, GTSBoy said:

By changing to a Halaltech and not having an AFM, typically. Or, they stall or otherwise carry on.

A lot of them are driven by p platers with stock ecu's lol. When does the stalling usually happen is it high speeds?

Edited by silviaz
On 10/31/2024 at 10:12 AM, silviaz said:

My tuner told me this as well that the reason the car will stall is because it has a AFM system, he said it I want to do it properly I need to delete that system, he said I can try it though to see how it goes. My BOV recirculates btw (can hear flutter sometimes though), how do s15's and stuff not stall and they also have the AFM system? I was considering blocking it off for ovbious reasons but was hesistant because of the above.

If you block off the BOV entirely you will get reversion out of the MAF and get a lean spike instead of a rich spike as the MAF double-counts the airflow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Fair enough, I am in no way a tire expert so I'm not familiar with all the terms and conditions. I'll definitely note down the AD09 to potentially try in the future. Rain is not too big of a concern for now as I will probably only drive in the rain when I have to. And considering I still lack experience driving the GTR I'd more than likely take it easy too. I have coilovers in the car but as I barely got to drive so far I never bothered to even check if they are adjustable haha. The suspension is almost entirely old and worn as well so I suppose when I eventually fix that in the future that would make a huge difference.
    • There's not a great deal to report here .... except ...... FOR .... LSD!!!  I bought a Quaife LSD from the UK and shipped it here .... Wish I'd just bought locally cause the shipping and duty was $700! But there were so many diffs used in the E90s I just wanted to be absolutely certain I was getting the right one so I spoke with a supplier in the UK who builds race cars and they have heaps of experience with the E90s.  I pulled the diff out which was seriously awesome - I've never done anything like that before, I must have watched 1000 videos on YT about it as well as consulting the Bentley manual. It was super easy in the end. The diff was delivered to the awesome folks at Hornsby Diffs and will be back in a few weeks. I also replaced the diff bushings with some Nolathane ones.  Really looking forward to getting it back and getting back to the track or even the skidpan.
    • yeah... the 13kg/mm springs weren't always in there, I had 10kg/mm but doing a few SMSP commanded heavier front springs. It's so good now going into T1 and T2, just need more seat time and real tyres.
    • Yes, well. Mine are less than half that. ARBs are not set to "dumb" either.
    • I would hope. But, we all know even the best companies have an issue sporadically.
×
×
  • Create New...