Jump to content
SAU Community

Recommended Posts

Stephen, try to get the error code and the description of the Airbag error. They should give it to you (FTG Nissan do).

When I go around to pick the car up later this afternoon I will see what information they are willing to give me.

You want to know because your mates car is still doing it?

When I go around to pick the car up later this afternoon I will see what information they are willing to give me.

You want to know because your mates car is still doing it?

yep.

We reset the error codes and it went away for 2 weeks then came back.

FTG stated that the error was in the "miscellaneous" directory in their consult so couldn't help as they can't read Japanese.

yep.

We reset the error codes and it went away for 2 weeks then came back.

FTG stated that the error was in the "miscellaneous" directory in their consult so couldn't help as they can't read Japanese.

As per your instruction I reset mine too, but the same thing happened and it started flashing again a few weeks later.

They are struggling with the Japanese too, but seem to think it could be a loose contact or something to do with the wiring. They are going to check all the Airbag wiring and circuits etc. and hopefully find the source of the error.

Once it's cleared they will do another consult and see how everything is going, fingers crossed it doesn't take them all day to locate the issue :|

Will update once I find out what the GO is.

As per your instruction I reset mine too, but the same thing happened and it started flashing again a few weeks later.

They are struggling with the Japanese too, but seem to think it could be a loose contact or something to do with the wiring. They are going to check all the Airbag wiring and circuits etc. and hopefully find the source of the error.

Once it's cleared they will do another consult and see how everything is going, fingers crossed it doesn't take them all day to locate the issue :|

Will update once I find out what the GO is.

I saw Bis XXB at Hornsby Nissan today - front disks off.

That power duct is very tiny for a lot of money.

Please let us know if you can feel any difference in performance, and how the service went in general.

My car is now due for a 60k service, and I can walk to HN.

mm

  • 2 weeks later...

On the subject of the Axis 350S above, I was lucky enough to take a 350 RX for a punt around the block recently. All I have to say is... WOW!!!!!

That thing hauls ass big time. It accelerates incredibly strong right from the moment you gas it, and it revs freely all the way to redline without any feeling of hesitation or restriction. As this was a rear wheel drive only, the car also felt lighter and you could weave in and out of traffic more easily than my ARX4. Another difference I noticed was the g/b. It responds to manual gear changes a bit quicker thanmy car as well.

Overall I was mighty, Mighty impressed with the VQ35DE engine. Initially I thought it would be a slug to drive but it has certainly changed my mind that now I've got a drive of one.

On the subject of the Axis 350S above, I was lucky enough to take a 350 RX for a punt around the block recently. All I have to say is... WOW!!!!!

That thing hauls ass big time. It accelerates incredibly strong right from the moment you gas it, and it revs freely all the way to redline without any feeling of hesitation or restriction. As this was a rear wheel drive only, the car also felt lighter and you could weave in and out of traffic more easily than my ARX4. Another difference I noticed was the g/b. It responds to manual gear changes a bit quicker thanmy car as well.

Overall I was mighty, Mighty impressed with the VQ35DE engine. Initially I thought it would be a slug to drive but it has certainly changed my mind that now I've got a drive of one.

imagine it in a manual!!!! :happy: I want one!!!!

Any thoughts on the lack of low down torque compared to our turbos?

The VQ35DE does need some revs to make it do its stuff compared to the VQ25DET.

On the subject of the Axis 350S above, I was lucky enough to take a 350 RX for a punt around the block recently. All I have to say is... WOW!!!!!

That thing hauls ass big time. It accelerates incredibly strong right from the moment you gas it, and it revs freely all the way to redline without any feeling of hesitation or restriction. As this was a rear wheel drive only, the car also felt lighter and you could weave in and out of traffic more easily than my ARX4. Another difference I noticed was the g/b. It responds to manual gear changes a bit quicker thanmy car as well.

Overall I was mighty, Mighty impressed with the VQ35DE engine. Initially I thought it would be a slug to drive but it has certainly changed my mind that now I've got a drive of one.

Any thoughts on the lack of low down torque compared to our turbos?

The VQ35DE does need some revs to make it do its stuff compared to the VQ25DET.

That's the thiing. It wasnt lacking any torque at all and in fact, dare I say, the VQ35DE felt it pulled harder than my car. I'm going to have another spin sometime this week or next and get another good feel of the DE engine.

While we are on the subject of VQ35DE powered Stagea's.

Just thought I would post a couple of VINs in case anyone wants OE parts, or to check transmissions etc.

350RX RWD

VIN- PM35 650407

Autech 350s (nm35 Axis style body)

VIN - M35 0033AZ

MODEL - TLGARSAM35DDAT33AZ

Just curious about the low-down torque thing - comparing the VQ35DE with the VQ25DET...

I would expect the 35 to have more torque up to about 2000rpm or maybe slightly higher, then I'd expect the VQ25DET to start overtaking it quite rapidly (speaking of torque only, not on the road) and keep that lead right through to the redline.

My reasons are these. From what I've read online, all VQ engines will have 80% of their torque available from 2000rpm. This doesn't include torque from the turbo on the DET version however.

So at 2000rpm the VQ35DE would have ~288N-m available (I think they have ~360N-m max). Also at 2000rpm the VQ25DET would likely only have about 80% of the torque of a n/a VQ25DE - which I'm guessing would be somewhere around 180-200N-m.

These numbers are not exact by any means, but without the extra torque from the turbo, the 2.5L is never going to match the 3.5L.

But all the same, in normal driving around, 2000rpm is usually reached as soon as you apply pressure to the throttle, so the lines may be blurred as far as which one "feels" like it has more torque.

And this is all just purely hypothetical too. Personally I'm still more interested in the turbo version, because of its higher peak torque and the fact its turbo (there's no replacement for boost :) ).

Edited by pixel8r
Personally I'm still more interested in the turbo version, because of its higher peak torque and the fact its turbo (there's no replacement for boost :) ).

+1

Interestingly "official" figures state that the PM35 with the VQ35DE uses more fuel (8.2km/L = 12.1L/100kms) than the turbo (8.9km/L = 11.1L/100kms) as well!

I do find it difficult to believe though.

when my turbo blew I had nowhere near the torque I had before and nowhere near the torque of a 25de that I test drove either

Yes, but I think that you are forgetting the lower compression of the VQ25DET compared to the VQ25DD

Edited by iamhe77
Yes, but I think that you are forgetting the lower compression of the VQ25DET compared to the VQ25DD

The VQ25DD is an impressive beast in itself. At just 2.5L it has more power and more torque than the (early) SR20DET. Its also got more power and torque than the current line of 2.5L n/a engines from the likes of Subaru, Mazda, Mitsubishi, Honda, and Toyota. They just need to bring out a decent hot hatch with it in. And no, the Tiida is not it. Why nissan insist on continually bringing all their crappiest models to australia and refusing to import class-leading cars like the skyline and stagea is beyond me. The Teana (maxima) is ok -very comfortable but a bit ugly IMO. They should've at least brought in the real maxima that the US is getting. Nissan would rather let toyota get all the glory with their 200 "killer wasp" aurion than fit a VQ37HR into the maxima. 245kw anyone?

Still, the fact that the stagea wasn't officially imported here makes it much cheaper for us to import, so i'm not complaining really.

Can anyone run 6U90000NM35317670 for me? No one in the fast thread can do stags.

Sure, but you don't need the '6U90000'

250t RX Four

Hard coat finish

TV/DVD option

No HICAS

Dunno what the other two are (70th anniversary???)

post-31842-1246016761_thumb.jpg

Edited by iamhe77

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...