Jump to content
SAU Community

Recommended Posts

  • 1 month later...

just put in new yellow jackets

the misfire above 5k is gone :)

and there seems to be a bit more power throughout the rev range (guess its back to what the power should be)

lets see how long they last... hopefully I dont have to utilise the 2 year warranty

btw car is no slouch... R33 GTR making 290kw or so

bought em off ebay on sunday... were at my doorstep when I got home from work on Tuesday... was very impressed with delivery time

also since we are talking about coils failing

I installed splitfires installed on my old GTS-T and it was making around 280kw

the new owner told me a month or two ago that one of the coilpacks had let go

they were probably in for about 15months

so Splitfires fail too

although the new owner did give the car alot of stick

Edited by usmair

I cbf reading through the whole thread but If your worried about your coil packs dying you should just go a waste spark setup, your coils will last 11ty times longer.

I'm interested in the OEM coils that are 105 each.. does anyone know who or where these are being sold?

105? I thought they were the best part of $190 each?

I cbf reading through the whole thread but If your worried about your coil packs dying you should just go a waste spark setup, your coils will last 11ty times longer.

I'm not sure what that is? Lower voltage smaller gap?

  • 2 weeks later...

I'm interested in the OEM coils that are 105 each.. does anyone know who or where these are being sold?

Hey mate I got brand new OEM coil pack to suit series 1 RB engines for $430 delivered in Oz!

Also 1 set of OEM series 2 R33 RB25 available

Sensational price for these factory OEM Nissan coil packs!

PM best contact.

See my thread

http://www.skylinesaustralia.com/forums/topic/372753-nissan-oem-rb-coil-packs-brand-new/page__p__6004132__hl__rb+coil+packs__fromsearch__1#entry6004132

  • 3 weeks later...

The proplem I see in this new coilpacks this days is that there is no quality control or any test other then the ones done by the buyers.

It is comun to see the china brands not testing anything

Splitfire offers all info and testing so you know they have pass qc

I have had splitfire for two yrs now

I run a power pack that shots 19volts to the coils

Which have damaged my oem coilpacks one time

Two yrs of 19 bolts a larger gaps

Over heating and pure abuse they still run great

Now my point for qc is that if you google this china non qc products you will find bad and good feed back.

So basicly it is a 50/50 chance.

I know if many parts the are sold in Japan that has been made in china.

But usually it's not completely done in china.

Like fpr

Internals and final assemble is done in Japan. But the outer case are done in china. Which later explains why you by a fpr and the pressure stays after the fuel pump is off.

Now the ones that are completely done in china with out qc

Fall all the way down as soon as you turn the fuel pump off

QC is what determines the out come

QC also determines that all parts or every fpr meets the complete standards require by each company QC

This is what determines price range

This is why your china non qc products cost less

Plain and simple

The proplem I see in this new coilpacks this days is that there is no quality control or any test other then the ones done by the buyers.

It is comun to see the china brands not testing anything

Splitfire offers all info and testing so you know they have pass qc

I have had splitfire for two yrs now

I run a power pack that shots 19volts to the coils

Which have damaged my oem coilpacks one time

Two yrs of 19 bolts a larger gaps

Over heating and pure abuse they still run great

Now my point for qc is that if you google this china non qc products you will find bad and good feed back.

So basicly it is a 50/50 chance.

I know if many parts the are sold in Japan that has been made in china.

But usually it's not completely done in china.

Like fpr

Internals and final assemble is done in Japan. But the outer case are done in china. Which later explains why you by a fpr and the pressure stays after the fuel pump is off.

Now the ones that are completely done in china with out qc

Fall all the way down as soon as you turn the fuel pump off

QC is what determines the out come

QC also determines that all parts or every fpr meets the complete standards require by each company QC

This is what determines price range

This is why your china non qc products cost less

Plain and simple

Not true for Yellow Jackets. We tested the YJs thoroughly before releasing them to the market. Not just in the factory, but on the street and the track, in real life circumstances. Im still in contact with some of these testers and nearly 3 years on, they are still going strong.

Every single coil that has failed and has been returned, has been tested and disected and this has helped us to improve on them.

Every now and again you get one coil that may have some issue from the assembly line. Its the same with the blue ones and the red ones too (As you can see from reading this thread). Its impossible to check them all internally and individually. My coils have been on the market now for nearly 3 years and there is around 7500pcs in use worldwide, in many different driving conditions and applications.

I can honestly say that since these have been on the market there has been around 70 pcs returned. So thats a failure rate of around 1%.

Most of these returns were at the beginning of market production too. Since improvements have been made, this return rate has fallen dramatically.

Im also well aware of how much of a pain in the butt (and the wallet) it can be to change coilpacks in the RB engines (especially the RB25s) so I dont want to inconvenience my customers with the hassle of a failing coil and the headaches of swapping them out.

The last thing I want for my product is for them to fail. One of my main priorities is to ensure that these are a good unit and will compete in performance and quality against the Blue ones. I work very closely with my associates to ensure that these are made well. The workers are great at what they do and they enjoy it too.

The longetivity of the coils will ensure the peace of mind for the user and will guarantee my success.

I dont offer a 2 year warranty for no reason. Im confident that the Yellow Jackets will last and I stand by this warranty so as to cover any issues that may arise in a realistic timeframe. So this can give the user a proper chance to use and abuse them over a realistic period of time and not be left out of pocket and unsupported. Ask anyone that has processed a waranty with these. I have never backed out or denied anyone their right to a sound product.

These coils are also not "mass produced" on a large scale and sold in "mass market" businesses/franchises like Autobarn. There is only one place in the world you can get these coils from and that is exclusively through Performance-Wise and I will always keep it that way so the quality is enforced and overseen by me, and so the price is always fair and not over-inflated, like the others.

QC is very important to us and is not taken lightly.

P.W.

:cheers:

  • Like 1

Not true for Yellow Jackets. We tested the YJs thoroughly before releasing them to the market. Not just in the factory, but on the street and the track, in real life circumstances. Im still in contact with some of these testers and nearly 3 years on, they are still going strong.

Every single coil that has failed and has been returned, has been tested and disected and this has helped us to improve on them.

Every now and again you get one coil that may have some issue from the assembly line. Its the same with the blue ones and the red ones too (As you can see from reading this thread). Its impossible to check them all internally and individually. My coils have been on the market now for nearly 3 years and there is around 7500pcs in use worldwide, in many different driving conditions and applications.

I can honestly say that since these have been on the market there has been around 70 pcs returned. So thats a failure rate of around 1%.

Most of these returns were at the beginning of market production too. Since improvements have been made, this return rate has fallen dramatically.

Im also well aware of how much of a pain in the butt (and the wallet) it can be to change coilpacks in the RB engines (especially the RB25s) so I dont want to inconvenience my customers with the hassle of a failing coil and the headaches of swapping them out.

The last thing I want for my product is for them to fail. One of my main priorities is to ensure that these are a good unit and will compete in performance and quality against the Blue ones. I work very closely with my associates to ensure that these are made well. The workers are great at what they do and they enjoy it too.

The longetivity of the coils will ensure the peace of mind for the user and will guarantee my success.

I dont offer a 2 year warranty for no reason. Im confident that the Yellow Jackets will last and I stand by this warranty so as to cover any issues that may arise in a realistic timeframe. So this can give the user a proper chance to use and abuse them over a realistic period of time and not be left out of pocket and unsupported. Ask anyone that has processed a waranty with these. I have never backed out or denied anyone their right to a sound product.

These coils are also not "mass produced" on a large scale and sold in "mass market" businesses/franchises like Autobarn. There is only one place in the world you can get these coils from and that is exclusively through Performance-Wise and I will always keep it that way so the quality is enforced and overseen by me, and so the price is always fair and not over-inflated, like the others.

QC is very important to us and is not taken lightly.

P.W.

:cheers:

Well said. Im one of the original testers& have had these in my car for close to 3 years now with no problems at all.

Strongly recommend Yellow Jackets and with the extra amount you save use it for other mods.

That said, OEM coils can be had for around the same money now (if you know where to look apparently, and I did :P) and they are proven to be 150,000km items ;).

Definitely. OEM are great and if you can get them for the same price as these then thats awesome and for the record, so far Ive done around 75,000kms on my Yellow Jackets. Will report back in another 3 years :D

Definitely. OEM are great and if you can get them for the same price as these then thats awesome and for the record, so far Ive done around 75,000kms on my Yellow Jackets. Will report back in another 3 years :D

be sure to let us know! lol

my red ones lasted just over 1 year with 1 pack failing.

if anymore go, i will be replacing them with yellow jackets which come with 2 year warranty which is a bonus as well.

Well i did start a new thread on what options were available for the RB's and what were the pros n consetc, but an overzealous mod decided im not worthy, so im dumping the info here so as not to waste it ....good luck with figuring it out, with all the negative neysayers in one corner & with a bunch i have nfi floating around in the other, just to help things! I was hoping to get a clearer answer via a poll but apparently we cant do that.......................... So anyway here goes:

Okada Project - Plasma Direct

Splitfire

FET

SuperSpark

Yellow Jackets

JJR

OEM

Random Ebay

----

HKS - Twin Powers

Okada Project - Plasma Lift

M&W - CDi

Links that I could find:

http://www.okadaproj...sa/products.htm

http://www.sf-j.co.j...lish/index.html

http://www.superspark.com.au/

http://www.performan....com/page27.htm

http://www.hksusa.com/products/?id=839

http://www.mwignitio...i_ignitions.php

*My 2 cents, Okada Project if money is no object, Splitfire if your after a proven product at a good price, Yellow Jackets on a budget & OEM if ya dont give a crp!

Edited by Zorro
  • 5 weeks later...

the jjr rb20 coils kept blowing up on my car jjr admitted they had problems with some of them replaced them with splitfires for me. this was a year ago i m unsure as to whether they are still running the same design coil packs or not.

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...