Jump to content
SAU Community

Recommended Posts

yeh, thought we would give it is much as we can as my tuner and i want to give the E85 a go. the added octane and cooler temps should allow it.

Sounds like excellent news!

11:1 is a good compression ratio, a little higher than original...

Cant wait to see/hear a video of the engine roaring...

  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

yeh, thought we would give it is much as we can as my tuner and i want to give the E85 a go. the added octane and cooler temps should allow it.

How much parts do you need to change to use E85?

I heard that from stock, you only need to change the injector, fuelpump and fuel filter and it should be able with a tune to run E85, or am I mistaking?

yeh, its all Gary stuff. the brakes are 330mm, wanted to run 17s, speaking of which, i picked a nice set of 8s & 9s up today.

suspension and brakes look good Stu. Is that blisteins, eibach springs and noltec adjustable bushes?

and the brakes are the 356 like we run?

no, that all sounds about right. i am running two 040 intank pumps & 42pound injectors.

How much parts do you need to change to use E85?

I heard that from stock, you only need to change the injector, fuelpump and fuel filter and it should be able with a tune to run E85, or am I mistaking?

Looking at your rear shocks you are running a GTR rear cradle. Would you happen to know the weight benefit? I mean do the bigger shafts just offset the alloy hubs?

The upgrade to the GTR cradle wasn't done for a weight advantage but for a strength upgrade. I don't think anything was weighed when the conversion was done.

pics,,, Rays Daytonas 17x8s & 17x9s

nice. they were a good buy. I was nearly going to grab them as a spare set for the silvia. then remembered I already have 3 sets of rims for the silvia.... :P

A complete GTR cradle compared to a GTS or GTS-T would be similar in weight but provide a lot more strengh to handle the extra two cylinders.

We did the conversion to alloy GTR hubs on Clinton's R32 and saved 3 kg per hub (the important part though is the reduced unsprung weight).

Heavier parts include the shafts, diff housing and additional front diff support bracket.

Common parts are the top arms, traction arms and lower arms (the only difference on lower arms is the balljoints).

hey Roy, i agree with Victory, the weight difference in the shafts will be compinsated for in the alloy hub assy. you may end up giving a kilo or two away in the centre but thats it. i couldnt tell you if the cradle assy was any heavier though. its difficult to weigh these big items, especially on bathroom scales.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...