Jump to content
SAU Community

R32 Ls1 Conversion

BezerkR32

By BezerkR32,
in Motorsport Builds

 Share

Recommended Posts

ant0ny Collaborator

ant0ny

Posted
Posted

very nice build... very well done.

2 things that might be worth a look would be on page http://www.skylinesaustralia.com/forums/R3...html&st=680 the air ram setup looks great maybe a little shallow but you are limited a little there. Very effective and something most average people don't consider.

But I wondered if a missed opportunity to direct some of the airflow over the 2 fuel rails and maybe a finned fuel rail to get more fuel cooling. The other is the strut brace... you would be surprised how much it would be flexing. a Straight one over the ram tubes will fit and work much better.

  • Replies 812
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

BezerkR32 Veteran

BezerkR32

Posted
  • Author
Posted

i see where your coming from, all the points you make are valid, i just didnt have the room. the strut brace is designed to run this way but around the back, but the engine sits so far back that it was easier around the front. the fuel rails sit 5mm under the bonnett so couldnt go over with the brace. you can with factory manifold. wasnt concerned with fuel temp as e85 is cold and it chews it, and some airflow will reach them.

very nice build... very well done.

2 things that might be worth a look would be on page http://www.skylinesaustralia.com/forums/R3...html&st=680 the air ram setup looks great maybe a little shallow but you are limited a little there. Very effective and something most average people don't consider.

But I wondered if a missed opportunity to direct some of the airflow over the 2 fuel rails and maybe a finned fuel rail to get more fuel cooling. The other is the strut brace... you would be surprised how much it would be flexing. a Straight one over the ram tubes will fit and work much better.

BezerkR32 Veteran

BezerkR32

Posted
  • Author
Posted

went through a little stage of depression. but decided to keep it for now.

engine is back in car with new sump fitted and all is good.

have organised a lsd shim kit off baron so should have that in and ready within the next week,

just need to swap on some tyres then ready too go.

unsure why I missed it....but why is this for sale on my105 stu!?!?!?!?!
MBS206 Grand Master

MBS206

Posted
Posted
went through a little stage of depression. but decided to keep it for now.

engine is back in car with new sump fitted and all is good.

have organised a lsd shim kit off baron so should have that in and ready within the next week,

just need to swap on some tyres then ready too go.

Can we redo the exhaust, and take it to texi? 3Rd gear off the mark frying tyres?

Victory Mentor

Victory

Posted
Posted

How would we go with a pair of "butt" plugs in the exhaust to just take the edge of the exhaust note and give it a run at texi?

I have an old pair of 245 semi's on a set of SSR's that you could fry for the day if you like...

BezerkR32 Veteran

BezerkR32

Posted
  • Author
Posted

yeh im keen to have a go, maybe some steel wool will do the job.

How would we go with a pair of "butt" plugs in the exhaust to just take the edge of the exhaust note and give it a run at texi?

I have an old pair of 245 semi's on a set of SSR's that you could fry for the day if you like...

  • 2 weeks later...
BezerkR32 Veteran

BezerkR32

Posted
  • Author
Posted

sounds just like mine lol.

pulled the diff centre out last week, pulled the centre apart only to find it was assembled differently to the nismo expoded view pics.

found workshop manual which then showed it was correct, so figured the nismo kit went together differently so re-assembled it as per the nismo instructions. (all in japanese mind you.)

feels alot tighter on the bench, but ill see how it feels on the track. i tried to find some thicker pre-load shims but they dont do them for the gtr centre, only the gtst. even tried slipping an extra clutch disk in but wouldnt fit.

put a good pair of second hand yokohamas on the front, will chenge the rears after a few skids on the weekend.

also going to wire a reverse lockout button in as im a little cautious when hitting 5th gear as reverse gear is along side it.

it has a lockout solenoid from factory, but only locks out reverse with ignition off. so wiring a momentary switch in so i have to press button to select reverse when ignition is on, otherwise reverse is locked out at all times.

Stu...stop messing about with the pansy 346 cuber

and get

This

http://www.youtube.com/user/SPEEDOMOTIVE#p/u/15/iuswdMLeo54

  • 1 month later...
  • 3 weeks later...
BezerkR32 Veteran

BezerkR32

Posted
  • Author
Posted

hey mate, advertised it to see if it would generate any interest. it took a while but recieved 2 calls this week, and i sold it yesterday....

wsnt intending on selling it but got a good offer.

unsure why I missed it....but why is this for sale on my105 stu!?!?!?!?!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sonicii
      After market rear camber arm adjustment

      By sonicii · Posted

      How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...