Jump to content
SAU Community

Recommended Posts

Hi guys,

I'm thinking of buying a 93-94 GTR. But lately I've noticed so many for sale, I'm not complaining because it helps to keep the prices down, but with so many for sale here and on car sales etc it makes me wonder that people don't want them. Why? Are they too expensive to run here? Insurance too much?

Any thoughts much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/191364-why-so-many-skylines-for-sale/
Share on other sites

The GTR is pretty much legendary everywhere you go. So what do the 17 yr olds do when they leave school? They apply for a loan and buys a GTR to impress their mates because he drives the legendary GTR. This is great for the first few month. Pretty soon, they are out of money and cannot afford to spend on the maintenece because they've spent the remaining $$$$s on petrol and tyres. A few months later, their rego is up, their CTP through the roof because of the car they drive (possibly). Then their full comp insurance is due. On their apprentice wage, it becomes a little hard to keep paying for all this and due to the neglected engine maintenece, it's starting to sound a little funny. Hence why so many for sale.....................well my theory anyway.

The GTR is pretty much legendary everywhere you go. So what do the 17 yr olds do when they leave school? They apply for a loan and buys a GTR to impress their mates because he drives the legendary GTR. This is great for the first few month. Pretty soon, they are out of money and cannot afford to spend on the maintenece because they've spent the remaining $$s on petrol and tyres. A few months later, their rego is up, their CTP through the roof because of the car they drive (possibly). Then their full comp insurance is due. On their apprentice wage, it becomes a little hard to keep paying for all this and due to the neglected engine maintenece, it's starting to sound a little funny. Hence why so many for sale.....................well my theory anyway.

lol

+1

Would you guys say that the GTRS that are brought into Australia are the crappy grade 3 and under auction cars from Japan? Thus meaning the cars aren't as good and seem to need a lot of work to be done when they get here and that's why the younger guys can't keep them? As well as the extra costs.

Only saying this because i went to Japan last June and I saw a lot of top quality GTRS at reasonable prices, so if take in account ALL the import fees and charges you could get a good R32 GTR here for less than $20,000. The GTRS here don't seem to be in good condition.

As I said first, I'm interested in getting one but is it better to get on here in Oz or import one myself?

What are some of you paying for insurance for a GTR with a premium of say $25,000?

Thanks

i think since australia is awesome and is able to have newer models of imports,that most of the older cars are getting tired and need to be replaced.

i know here in canada many of the gtr's are high kilometres and are high maintenence because of that.but most people that bought them keep them and just buy a little crap car while the gtr is in the shop,since you cant get an r33 for a couple more years.

......canada import laws are gay

  • 2 weeks later...

well my case for selling was that i want to save for a house and u just cant seriously be trying to save if you drive a car that cost you $10k a year, at least, to run and maintain. put ontop of that ppl who have to pay off the car loan and interest.....

saving for a house now so it had to go...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...