Jump to content
SAU Community

Recommended Posts

Pull ups for wide grip lat pulldown; chin ups or neutral grip for close grip lat pulldown. Dips or dumbell overhead tricep extensions for tricep pushdown.

eh.. pull ups and chin ups.. I can't even do one of either unassisted. Will need to get elastic bands and rig up a bar in the garage... not sure if I can do that though. Anything else possible? Tricep extension I can do.

eh.. pull ups and chin ups.. I can't even do one of either unassisted. Will need to get elastic bands and rig up a bar in the garage... not sure if I can do that though. Anything else possible? Tricep extension I can do.

I'd get bands and work towards it. Chins are underestimated. Work towards weighted chins and dips

I wouldn't say that was an overly provacative photo :/

To the dude saying Charlie won't take a pic like that coz she's not in a position to look as good as she does, blah blah - You're a bit of a dick to say something like that.

Thanks for your opinion.

It wasn't a negative, more so that from my experiences people start to enjoy taking photos of themselves once they can see progress and results. Charlie is still progressing towards her goals and doing well.

hahaha love the honesty

I give nothing but and seldom care how it makes me sound :)

P.S. I don't have a FB and cbf making a BC account, so didn't vote for your car, though I did look at it. As for not replying to the PM, that was sheer laziness.

Made a new concoction for my protein shake tonight. Might seem excessive but trust me it's the only way I sleep at night.

Protein powder ~30gm protein

Banana

Milk

Bowl of nutrigrain

It's the nutrigrain part that made it, made it urgh.

porridge in the morning...every morning. With cinnamon... thermo properties son

eh?

cinnamon - stimulates thermogenesis - helps to temporarily increase your body temperature slightly which causes a slight raise in your metabolism..

cayenne and green tea also have similar properties (but not as yummy!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 2 spots that my exhaust guy joined the 2 pipes together  Made a big difference. I'm now able to live with it. I can make it louder if I want by removing the HKS caps.
    • Hi all, considering clutch upgrade to support 1130 engine hp from 1650cc injectors on e50 at 85% duty cycle (1650 x (11.85/14.7) x 85%). Narrows down to these three as they can be converted to use gm 26 spline input shaft if I ever want to use transmission with that input shaft (orc1000f and r3c easy/cheap just change center hub; tr2cd pricier must change clutch discs). Pricing orc1000f similar to tr2cd, r3c about usd 200 pricier. Orc1000f triple plate 200mm. Tr2cd twin plate 215mm. R3c triple plate 215mm. Claimed max torque : orc 1000f 723 lbs ft; tr2cd 800 lbs ft; r3c 1100 lbs ft. Why orc1000f triple plate but claims lower max torque vs tr2cd twins? Is orc1000f underrated? Any info maxing out these clutches? Info on street/traffic driveability/pedal feel? Thank you for any info on them.
    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
×
×
  • Create New...