Jump to content
SAU Community

Recommended Posts

Does anyone bother with pre work out boosters? Such as bsn no xplode, MP assulat, Jack3d ect.

i've used MP assault twice (my boss bought some and i had a try). i only used a half dose on 2 occasions. i used it before a 50km bunch ride that starts off slow on the way out and turns into a race on the way back. i found it made a small difference. i was able to hang on a bit better on the way back, as well as the fact that i didn't have as much of decline in energy as the day went on (given that i have to get up at 4:30am to get to noosa by 6am for the ride, and i generally don't get to bed until about 10 the night before). i don't drink coffee at all, so i think it may have a bit more of an effect on me than people who drink a fair bit of coffee.

my boss only uses it before 1 ride a week, which is the fastest ride of the week. it's a full on assault through the hills where the aim is for there to be as few people finish with the bunch as possible. he found that it means he can push that little bit harder and longer and it can be the difference between hanging on and not hanging on if a few of the professional athletes are out in the bunch, plus the fact that there are a handful of others on similar supplements (it's a bit of a bragging rights ride). the first time he used it he said his face started tingling about 10 mins into the ride, lol.

The smith machine bars arent 20kg but most freeweight Olympic barbells will be 20kg

Pretty certain they are all 20kg. Haven't used a 15kg one yet!

You will become more picky as you go ;) You cannot simply 'keep in shape' into Mordor >.> Sense this makes none but you get my point.

I have being drunk twice last year. 21/9 for and 31/12. Used to have 4 coupons to use up a year.

Knowing after a gym sesh in 35 degrees that the only way you can get home is on a motorbike:

tumblr_lt8dgxrOey1qi4i5m.jpg

But once you're on after 20 minutes of procrastinating and the wind is blowing through your jacket at 100km/h:

114172_340.jpg

Yer im not sure i guess there olympic bars, there is a shorter one. The longs ones just dont seem like 20kg, but if they are it raises my number by 5Kg :D

Yer i found it hot leaving gym, couldnt stop sweting in the dam car, was a mid mourning/midday sesh

First couple of times i used Bsn No xplode 2.0 i had the tingles in the hands, I never really used it before that. Its all personal tolerance with the stuff i guess. Im more careful now to prevent crashing, ruins work as being a tradesmen.

My dick tingles from beta alanine.

Highly recommended before long bouts of sexy time

loooooooooooooooooooooooooool

If you want to experience a whole new level of sensations during sexy time, I highly recommend 1mg NBOMe 25-i.....

Geh, gradually burning myself out >.< Just started full time work again, still doing gym, 1 hour commute to work, up doing horse stuff before I leave. Over it, need to sleep for 12 hours! Saturday night... that's my chance to sleep a lot.

New supplement: Coffee :( after 10 months being off it.

Neighing happens, not by me though. Have to herd a spritely colt that's running everywhere except where I need him to go. His neigh is hilarious though. Good exercise walking up and down steep hills!

Neighing happens, not by me though. Have to herd a spritely colt that's running everywhere except where I need him to go. His neigh is hilarious though. Good exercise walking up and down steep hills!

Do you "whisper" to him?

perhaps next time you whisper you should suggest he does squats

Define "like a girl" - strength or technique? lol

Maybe a bit of both, i concentrate on getting the right tenchnique, not sure if my elbows are correct now i think. More the struggle with the weight. Might of been it was last thing i was doing only managed 4@50kg

Is it common for people to struggle with there BP? My squat just reached 100 and DL is over.

Might need more tricep work

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...