Jump to content
SAU Community

My First Drive: R35 Gtr Pic Thread

sewid

By sewid,
in R35 GTR

 Share

Recommended Posts

sewid Grand Master

sewid

Posted
Posted

Met up with my friend Shin-san on Friday night after Tokyo Auto Salon who I had asked for a ride to Daikoku-futo Parking Area, a well known hang out for fast cars about 40 minutes out of Tokyo. I knew he had an R35 GTR but I hadn't seen it yet. We met at 9pm in Shibuya and I was in awe to see the new GTR parked downstairs when he came to pick me up.

I got in and was instantly impressed with the car. I had sat in many R35's before but sadly none of them were running at the time, Ginza Gallery and Auto Salon cars only. The rattle of the clutches and the quiet burble of the twin turbo V6 had me anticipating great things of the night ahead.

Inside of course is full of gadgets and I was quickly playing with the MFD while Shin navigated some tight streets with construction zones to get some fuel closer to the freeway. The touch screen is a great setup and is a lot easier to use than the R34 GTRs button layout. Navigation is also built in and will automatically flip between navigation and MFD when the next turn is approaching.

While this was happening though I didn't even notice the bumpy city streets and the ride was a lot nicer than I had expected after reading some of the Australian motoring journo's feedback. I can only wonder if they knew how to put the car into comfort mode or if they were just blindly driving it in R-Mode...

Nothing is perfect however and the navigation system got us lost when it guided us to a closed down fuel station. A few turns later we were in Roppongi and decided to block traffic for an impromptu photo.

drive-001-web.jpg

drive-002-web.jpg

drive-003-web.jpg

With that out of the way we could get some fuel nearby at a local Jomo station. Interestingly the bowsers are located in the roof here to save space on the ground.

drive-004-web.jpg

drive-005-web.jpg

While filling up I got a good feel for the aesthetics of this car. It is a premium package in dark grey completely stock with all options minus the rear view camera. The big giveaway is the drilled brake rotors. The interior is black leather and is amazing to sit in and smell. The car is big and imposing and gets a lot of looks on the street.

When we got done there I got a pretty big shock when Shin handed me the attractive looking GTR keyfob and let me take the wheel. I quickly took him up on it before he could change his mind but as soon as I did so I had a nagging doubt on just how the hell I was going to back this brand new R35 GTR out into Tokyo traffic.

That quickly passed though as I realised that this new GTR is actually a amazingly easy car to drive. Large rear view side mirrors and actually useable rear view mirror inside help. Unlike both the 33 and 34 GTR which suffer due to the wing elements - adjust them at all and bye bye rear vision. Then there's the lack of a big heavy clutch making everyday tasks so easy - you really can daily drive this thing.

I started off in auto mode and barely drove the thing at all. Lots of traffic lights made getting used to the car easier as I had a decent amount of time. Before long though I switched to manual mode where it stayed the rest of the night. The gearbox really is a dream. Everything people have been saying about it is true. Blasting up through gears in R-mode or sedately potting around town in regular mode changes are swift and smooth and you're never off boost if your pushing it through a gear change.

Down shifts are fun too and I was constantly looking for places to shift down. Hearing that V6 motor blip it's own throttle to shift down a gear is like listening to great music.

As for how it goes in a straight line. Fast. Never driven anything quicker. It just pulls and pulls and pulls. Even when you think it really shouldn't be fast it is. Say 5th gear doing 100 on the freeway touch the throttle and instantly you feel good torque, nothing like driving an previous GTR. 3rd gear out of a toll booth, foot to the floor, back wheels lose traction for a tiny fraction (snow tires were fitted to this car) of a second and away you go. Left to it's own devices the GTR will shift up at the optimal RPM point but this can be turned off. The only complaint is that it's over so quickly. The car will hit it's 180km/h speed limiter so quickly that it seems to spoil the fun almost before it's started.

Around corners the car felt exceedingly well planted. Body is flat through fast turns and inspires a lot of confidence. There's just not enough corners around for me to really push it through but what I did I loved.

Anyways we eventually arrived at Daikoku PA where we found a friend to park next too.

drive-006-web.jpg

drive-007-web.jpg

We hung around checking out cars at Daikoku until midnight when the police kicked everyone out as they do and Shin let me drive the GTR back to Shibuya taking the Wangan Freeway.

The car is a real gem and I don't know how I can go back to my GTR now i've driven one.

Link to comment
https://www.sau.com.au/forums/topic/201418-my-first-drive-r35-gtr-pic-thread/
Share on other sites
msports180 Mentor

msports180

Posted
Posted

Thats such a beter perspective then motoring journo's in mags because you didnt epxect it to ride like a soflty sprung lounge etc and you appreciate the car. There sooooo hot.

Oh and by the way... you lucky bastard ;)

NYTSKY Grand Master

NYTSKY

Posted
Posted

Dammit i did see that car there,took a pic of the 35s,34 and the hachi parked next to each other if id known it was was you chris i would have come and said hi.Ah well,its sounds like you had a great experience.

funkymonkey Grand Master

funkymonkey

Posted
Posted
nice work K-man. Car looks awesome in Dark metal grey. on of my favourite colours for the 35. ;) well any GTR really.

+1 limited edition gunmetal grey rocks my jocks too

wrxhoon Grand Master

wrxhoon

Posted
Posted

Good work Kris, looks like you found your twin there as well, I wish it was me though ( driving it). Maybe time to sell the M-spec for a 35??

As for the bowsers on the top, thats almost normal in Japan, I thought you would have seen them before!!

R338OY Veteran

R338OY

Posted
Posted

Awesome post.

Great that you can share your experience with us twats on the bottom of the globe ;)

Good to hear it's better than all the stuff you've read! I thought that'd be the case=bigger than the hype

sh@un Grand Master

sh@un

Posted
Posted
The only complaint is that it's over so quickly. The car will hit it's 180km/h speed limiter so quickly that it seems to spoil the fun almost before it's started.

I guess retro-fitting an overseas spec ECU will be a popular mod until the Jap tuners figure out an aftermarket option or speed cut trick :P

Beer Baron Grand Master

Beer Baron

Posted
Posted

they already have. :D I raced the mines GTR on the freeway back in the first week of december and they weren't held up by no 180km limiter. they already have their VX rom and I assume the very first thing they did was remove the speed cut. :) other tuners I'm sure by now have their own ecus, or eproms to remove it too.

sewid Grand Master

sewid

Posted
  • Author
Posted
they already have. :D I raced the mines GTR on the freeway back in the first week of december and they weren't held up by no 180km limiter. they already have their VX rom and I assume the very first thing they did was remove the speed cut. ;) other tuners I'm sure by now have their own ecus, or eproms to remove it too.

Yep I can confirm that the Mine's ECU upgrade can most definitely remove the speed cut. You need to send off your 35's ECU in an exchange but it can be done in a week turnaround.

Other tuners say they have ECU upgrades as well but didn't see the actual product on display or get any real indication on availability like we did for Mine's. Probably didn't ask the right people.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...