Jump to content
SAU Community

Recommended Posts

Might just mention. For the first time in 20 odd years we have moved away from the Nissan's. We have sold the GIO gtr to Terry Lawlor.

But in a deal we have also settled and I will now be campaigning the 1992 Caltex Sierra. Should be an interesting experiance as I have have driven most of the GMS cars but never a Sierra.

Might have to tighten my nuts a little more coming out of the corners!!!

anyway.....just an update!

P.S. Do you approve of the move Roy! :P

FARK YEH! The rebuild has really seemed to have helped the Lawlor Sierra. Seems to have pace to burn and then just cruise relative to the others! I wish I had the cash to grab it before Lawlor as I understand it was reasonably priced. (all things considered) its also a late model Sierra so 6 spd, less weight, bigger tyres :) :) Giggity, giggity.

http://www.skylinesaustralia.com/forums/topic/189449-gibson-gt-r/?hl=%20gtrtech

The link to a thread I started ages ago.

Stack more race stuff posted there.

Edited by gtrtech
  • Like 1
  • 3 weeks later...

Well, it was a big field for the VHRR historics at Phillip Island. I think 42 cars started in the grp A and C category!

Jetwreck drove the RS500 really well, and we had a lot of learning to do about the car, seeing I saw it first time Thursday! We quali into 4th, where Craig got a lesson in rolling starts from Jim Richards, who was next to him, in the HR31 :P

The RS500 finished all the races in fours place. A great effort considering the lack of time driver and crew have had with the car :)

The GIO GTR had a brilliant weekend with Terry Lawlor behind the wheel, quali first, and while he was made to work for it, made a clean sweep of the races.

It's not the horror story that everyone goes on about. But once it starts to wheelspin it won't stop.....steps out quick. Might notice I'm a little easy on the go fast peddle....my call me a bit of a pussy at the moment.

31 for the sound....cossie for the speed and turn in. We are lucky with the one we have. Last one made so it has all the good bits. I'll find another 2-3 seconds hopefully. The front was pitching on me a little to much so it'll get faster

  • 5 months later...

Might just mention. For the first time in 20 odd years we have moved away from the Nissan's. We have sold the GIO gtr to Terry Lawlor.

But in a deal we have also settled and I will now be campaigning the 1992 Caltex Sierra. Should be an interesting experiance as I have have driven most of the GMS cars but never a Sierra.

Might have to tighten my nuts a little more coming out of the corners!!!

anyway.....just an update!

P.S. Do you approve of the move Roy! :P

I'm back to this thread after a long time but never mind Roy, but as a long time RS500 fan, I approve ;-)

cant wait to see this thing in the flesh.

Had good results too, at Muscle car Masters last weekend. A series of 3rds, a 2nd, passing Jim Richards in a wet session, and a fourth. The GTR was dominant in testing conditions, as to be expected.

The car performed fantastically, and Craig did his bit too ;)

http://www.heritagetouringcars.com.au/heritage-touring-cars-light-up-muscle-car-masters/

http://www.heritagetouringcars.com.au/heritage-touring-cars-muscle-car-masters-photos/

  • Like 1

Had good results too, at Muscle car Masters last weekend. A series of 3rds, a 2nd, passing Jim Richards in a wet session, and a fourth. The GTR was dominant in testing conditions, as to be expected.

The car performed fantastically, and Craig did his bit too ;)

http://www.heritagetouringcars.com.au/heritage-touring-cars-light-up-muscle-car-masters/

http://www.heritagetouringcars.com.au/heritage-touring-cars-muscle-car-masters-photos/

good to read that the car has great pace adn that Craig is obviously a good steerer.

i'd love to be able to see this thing in person.

At last years Muscle Car Masters over Fathers Day weekend it was Lawlor hammering in the Caltex Sierra . He had the wick turned up for a few laps to charge back through the field after retiring from the earlier race. Was good to see a Sierra with the wick turned up. Most pot around in fear of lunching them (which is fair enough)

At last years Muscle Car Masters over Fathers Day weekend it was Lawlor hammering in the Caltex Sierra . He had the wick turned up for a few laps to charge back through the field after retiring from the earlier race. Was good to see a Sierra with the wick turned up. Most pot around in fear of lunching them (which is fair enough)

The caltex car is running very conservative boost levels and a safe tune. First event with a new motor.

Considering how the teams back in the day would bring 3 or 4 motors to a weekend, it's not surprising owners don't want to run the ragged edge today!

Btw, there is a GrpA RS500 for sale atm, Damon Hills car. $139k

U buy naow?

Too much cylinder pressure for the motorsport blocks to handle, but they crank out some decent power until the block lets go. I don't blame the current Sierra owners for running less timing and boost either, they used to run 6-700hp back in the day at stupid boost.

They make the engines quick release for that reason. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can you help!   Can you tell me a few places you got your Flex Fuel Kits installed in Sydney The only one I know of is Tunehouse. Thanks in advance!!!  
    • Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
    • found a company that makes a flat gauge face 3-d printed mounting base kit to eliminate the dished style gauges. if anyone else is looking to do the same https://www.dashfreaks.de/shop/flat-dials-holder-nissan-skyline-r34-gt-gtt/    
×
×
  • Create New...