Jump to content
SAU Community

Recommended Posts

Um.......

All Clubsprint Series vehicles must retain their originally designated engine. For example, a Nissan Skyline R33 GTS-T came from the factory with an RB25DET, and therefore must have an RB25DET, otherwise it will be designated into the Superlap Open Class.

........this raises one obvious question:

Is this to eliminate people with 180sx's who have put rb26's in there (and alike, 20B's in RX7's etc), or all hybrids (for example, an rb25 head, rb30 bottom end, in an r33 gtst). If the later, why?

Also whats the entry fee?

Im keen as mustard for this one, but not if i dont qualify for street class

  • Replies 1.9k
  • Created
  • Last Reply

Top Posters In This Topic

Steve....like any racing they need to decide on some rules....and with any rules some cars are advantaged and some are disadvantaged.

Engine swaps are still OK overall, you just change the class you are competing in.

fark the super class has some big names!!

this is going to be awesome!

Im just going for the fun of it! And as long as I beat Steveo lol

Russ, let me know when you guys are going to go for a few practice days, would be good to see the cars in action and finaly meet you!

Cheers,

Chris

Hi Guys,

For starters thanks for your EOI form Chris I did recieve it and have now added you to the entry list for Clubsprint Class.

N1GTR - I called a meeting to dicuss your issue this morning and thought about changing it but after even more discussion we have decided to keep the original rule.

As for entry fees:

Open Class - $450 includes Timing Device and a Garage

Clubsprint Class - $250 includes Timing Device - Depending on how many Open Class entries we get Clubsprint Class entrants may be offered a garage at an extra cost if we have some left over.

NYTSKY - No you will not be able to enter Clubsprint Class with a screamer pipe. This clashes with the Street Legal side of the Class. There are some limits on this Class which is what seperates it from the Open Class. The cars in Clubsprint Class have to have a working Cat Converter and if you have a screamer pipe then there is not much point to having a cat.

Cheers

-Nathan

Edited by Superlap Australia
I'm in one way or another!

Would a GTR with all it's front drive line components removed be eligible to run in the RWD clubsprint class?

That is fine.

Cheers for the update Nathan!

:cheers:

Let me know when I need to pay :)

No worries Chris, Will do.

Cheers

-Nathan

cool guys the more the better!

dunc get those bloody restrictors out.

just to make it clear, i have nothing to do with the running of the event , just helped them with some ideas and things!

i am there to race!! :cheers: and drink !!!

there are two r35 gtr's already entered in street car class!!! one which i will be driving ! :)

yeah chris bring ya car over!!

apparently they will have displays and girls and some corporate stuff!!

I see the word girls, I'll be there in some form or another

I'm curious as to why the open class cost a lot more than clubsprint class?

Might have to sacrifice a few track day later in the year for this.

I see the word girls, I'll be there in some form or another

I'm curious as to why the open class cost a lot more than clubsprint class?

Might have to sacrifice a few track day later in the year for this.

There are a few reasons. For starters the garage is an extra $60 per vehicle, but the big difference is the prize money.

Open Class Outright Winner - $1000

Open Class Outright 2nd Place - $700

Open Class Outright 3rd Place - $450

Clubsprint Class Outright Winner - $550

Clubsprint Class Outright 2nd Place - $350

Clubsprint Class Outright 3rd Place - $250

*These amounts are not finalised however this is the starting point that we are looking at*

Each of these will recieve a trophy. The winners of each category ( ie: fastest 4WD etc ) will also recieve a Trophy and possibly a prize pack of some sort. This is yet to be finalised.

Then also the Shootout at the end of the day the Open Class gets more prize money than Clubsprint Class but those amounts are not finalised.

Cheers

-Nathan

Edited by Superlap Australia

personally I reckon the old way was better. cars with engine conversion etc should be in open class.

apart from anything else watching someone with their supermega RB30 build pushing say 400rwkw doing laps on their nangkangs (as semi-slicks are not allowed) is going to be scary. I think the whole idea of the clubsprint class is for the less seriously modified cars. engine conversion throws that out the window.

doesn't worry me too much, but in most other types of racing engine conversion puts you into open. as it should be.

personally I reckon the old way was better. cars with engine conversion etc should be in open class.

apart from anything else watching someone with their supermega RB30 build pushing say 400rwkw doing laps on their nangkangs (as semi-slicks are not allowed) is going to be scary. I think the whole idea of the clubsprint class is for the less seriously modified cars. engine conversion throws that out the window.

doesn't worry me too much, but in most other types of racing engine conversion puts you into open. as it should be.

I agree Richard and after further discussion it will have to go back to the original. I have now changed it back to the original.

Edited by Superlap Australia
Guest
This topic is now closed to further replies.



  • Latest Posts

    • Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...