Jump to content
SAU Community

Recommended Posts

  • Replies 136
  • Created
  • Last Reply

Top Posters In This Topic

lol!

the f430 gearbox is on par with the gtr.

i personally think the F430 Scuderia gearbox is better than the gtr but i havn't driven a f430 or a gtr for that matter...

Actually, the F430 gearbox shifts slightly faster than the GTR's but loses out in terms of smoothness.

still waiting to read a reply from 2 pages ago about the plasma bores and if they will handle more then 600hp and if 100 000km rebuild is true?

If you are making serious power a 'freshen up' style rebuild occurs often. The more power the more frequent the rebuild. Race motors are rated in hours. A freshen up isn't much dosh compared to what you have blown on replacement brakes/tyres by the time it comes around. No big deal.

carbon|ceramic composite rotors- just awesome

98579429lx9.jpg

that'd be a first for a Jap manufacturer then

i am i the only person to notice the carbon ceramic brake rotors on that car?

maybe compare our respective post dates, perhaps?

off the top of my head... could be hideously wrong

GTR = .2 second shift

F430 Scuderia = 60 milliseconds (maybe even down to 20 milli in full race mode)

F430 Scuderia is 60 milliseconds (in race mode) as stated above.......the limiting factor is the synchros.

typical rx7 driver.

how will the carbon brakes work from cold on say, a targa stage, stuart?

btw isnt the gtr gear change time 0 sec when you change to the preselected gear? surely thats the whole point.

If the V-spec goes on sale before Nissan AU start selling standard R35's, that means we can still get them as private imports, yeah?

Ok, after reading the gearbox talk on this thread i have to say DSG, selespeed, F1 transmission or whatever you want to call it isnt always perfect. I have been a mechanic working on Ferrari's pretty much exclusively for the last 3 years so i have a tonne of experience dealing with the F1 box. Now for track days or blasting through the backroads the F1 box is simply awesome on the F430 (havent driven the scud yet but am sure it will be better still) but it can be temperamental and its reliability is starting the become an issue as the cars are now a few years old. (the 360 and 355 F1 boxes are rotten in this respect). Now i know the system on the GTR will be different but im sure similar problems will eventually arise such as dodgy pumps, actuators, release bearings, clutch position sensors etc..... All things that a normal manual box doesnt need. The F1 box in the F430 is an awesome bit of gear when its all working great but an F430 with a manual box is still are beautiful car to drive and i cant see how it would be any different in the GTR. About 40% of ferrari owners still opt for the H pattern so it is still relevant to ask is the GTR will have the option. Saying all that i think its probably best for the V-spec to be DSG only (360 challenge stradale and Scuderia are F1 only) and it would be a good idea for the standard GTR to have the H pattern as an option. Hey it will be better for alot of us in 10 years time when we get our hands on second hand ones not to have to worry about alot of the problems on an old DSG box can cause. Also there is probably 15K worth of gear needed for the DSG which could be knocked off the price on a H pattern car.

Also with my experience with Carbon ceramic brakes, yes very expensive but will last much much longer than a standard set. If you do alot of track days or hard spirited driving then the cost difference will eventualy mate up and the stopping power is unreal. I have done race prepping on an f430 challenge for 2 years now and we still havent had to change the discs on the car just the pads. And yeah, discs are around the 8k each mark.

I really couldnt tell you as i havent seen alot about the way the gtr box actually works. Id take an educated guess and say it would be very similar except for the clutch setup.

Very few similarities apart from the fact that you dont operate the clutch yourself and you change gears with paddles.. the Ferrari F1 box and the Nissan DSG are not easily comparable as there is not much similar to compare.

Yes competely different....

The Ferrari F1 gearbox, is a normal manual box with some clever software and actuators to operate the gear selection and clutch. The Alfa Selespeed gearbox is actually a development of the original Ferrari F1 system. The BMW SMG and Toyota SMT are very similar in this respect.

The GTR transmission has more in common with the VW DSG, Audi S Tronic and BMW M-DCT. With these systems the transmission contains two clutch packs. One looks after odd number gears, the other even number gears. As the car accelerates in first, the transmission has already selected second gear, and so at the change point, all it needs to do is to declutch first, and engage the clutch on second. Once this has been done, the transmission can pre select third gear and so on. This allows a shift to be made in 8 milliseconds. That compares with 150 milliseconds for the F1 transmission in an Enzo.

With the GTR using wet clutches, the life expectency should be higher than the F1 type clutches that get absolutely trashed during parking, and also by people driving them like an auto, holding the car stationary on hills using the transmission rather than the brakes.

Edited by nickcorr

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...