Jump to content
SAU Community

Recommended Posts

^The purple doesn't last long. Turns brown as it oxidizes :P

Have used Nulon 10w-40, Motul 8100 X-Max 10w-40, Royal Purple Synerlec SL, API and HPS 10w-40 and now Penrite Racing 10w-40.

All these oils we used for 2 or more oil changes cos I want to see if there were any benefits.

No discernible performance difference. Engine ran the same.

The only thing I noticed was that the Nulon at 5000km became a lot thicker whereas the other oils stay nice and fluid at cold temperatures.

The old adage "you do get what you pay for" doesn't always apply to all things especially engine oil but in this instance, it was enough for me to move away from the product.

Look to be honest Royal Purple is the best oil I have ever used so far, it craps over Motul IMO, engine ran so much smoother, quieter.

Only reason why I am changing is due to the price, it was ok before the price hike at $90 a bottle, then it went up to $110 and now almost $130 and for something that you're just gonna dump every 5000kms average 6 months its a waste.

Look to be honest Royal Purple is the best oil I have ever used so far, it craps over Motul IMO, engine ran so much smoother, quieter.

Only reason why I am changing is due to the price, it was ok before the price hike at $90 a bottle, then it went up to $110 and now almost $130 and for something that you're just gonna dump every 5000kms average 6 months its a waste.

Couldn't agree more, royal purple has been my choice of oil for over 4yrs, but I would like to give hpr15 a shot

Couldn't agree more, royal purple has been my choice of oil for over 4yrs, but I would like to give hpr15 a shot

Err, HPR15 is one level cheaper than Royal Purple. If you want an equivalent, get one from the Racing (formerly SIN) range.

Okay, oil done... My oil pressure is now lower than normal?? It used to sit just under 4 in stock 32 gtst gauge.. Now sits under 2... And both drop when car gets warmer obviously..

Probably the oil pressure switch thing. My car does the same sometimes.

  • Like 1

Confused if I should go with Penrite Racing 10 10-40w or Penrite Racing 15 15-50w, Car has 81000kms on the clock with just the first stage mods, intake, front mount, exhaust, 12psi, power fc 211rwkw, thanks.

Depends on what you do with it, if you daily drive it 10-40 will be great, if you flog it for hours or track it go the 15-50, in this 40c weather the 50 would be better even for daily driving but it doesn't last more than a month or so so 40 I would still put in.

Edited by Rolls

Okay, oil done... My oil pressure is now lower than normal?? It used to sit just under 4 in stock 32 gtst gauge.. Now sits under 2... And both drop when car gets warmer obviously..

i had this issue when i trialled mobil1 few years back, engine was bit noiser on startup as well iirc, switched back to royal purple 10w-40 and all was good again, dont recall which weight mobil1 i tested though

Quick question.

Got a mate (R33 GTS-t) who needs an oil change, he has a spare bottle of 0w40 in the garage.

is this going to cause any damage if he puts it in knowing it's getting up around 38 degrees in Canberra?

Okay, oil done... My oil pressure is now lower than normal?? It used to sit just under 4 in stock 32 gtst gauge.. Now sits under 2... And both drop when car gets warmer obviously..

In the manual it says to check oil pressure by removing the sender unit and to connect an after-market pressure gauge, and test on a warm engine...

RB20DET

@ 600 rpm pressure should be 1 kg/cm2

@2000 rpm pressure should be 3 kg/cm2

@6000 rpm pressure should be 4 kg/cm2

and the do say these are approximate readings.

In the manual it says to check oil pressure by removing the sender unit and to connect an after-market pressure gauge, and test on a warm engine...

RB20DET

@ 600 rpm pressure should be 1 kg/cm2

@2000 rpm pressure should be 3 kg/cm2

@6000 rpm pressure should be 4 kg/cm2

and the do say these are approximate readings.

Uhhh, okay.

Well I don't know where the sensor unit is..

And I have a Defi oil pressure gauge, not installed though..

My oil pressure doesn't change at all with RPM?

Only drops once and that's when the car is warmed up..

Quick question.

Got a mate (R33 GTS-t) who needs an oil change, he has a spare bottle of 0w40 in the garage.

is this going to cause any damage if he puts it in knowing it's getting up around 38 degrees in Canberra?

Nope it's fine. Only issue I can see is that there might be light oil burning when cold, if the motor is worn.

Well if you want peace of mind then you might just have to book it into a service centre to have it checked properly.

Yeah, looks like I might have to.. Bleh

I hate paying labour costs :(

Plus find all other things wrong with it lol..

hey guys just wondering what oil weight you would recommend for a fully built rb25 its oil change time and i was gonna go with redline 15-40w i have been using castrol edge titanium 10w60 but someone suggested this isnt a good weight for goldcoast during summer? i know this has probably been covered in the previous 152 pages but i dont have time to trawl and ive done a few searches but not really answered my question. so i thought i would get some opinions

anyways cheers for any replies

Edit: i should add it is daily driven (not very far a lazy 10 min drive) and if it were ever to go to a trackday i would change to something recommended for the track.

Edited by Nii San

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
    • Hi, I need same this wing nismo , Does anyone have one for sale?  if any one have can contact me  00966546888343
    • Nah, lots of insurance repairs on V36 and V37 for pedestrians deployments. Reasons ranging from possums, to extremely severe potholes have deployed them. However, paying for the full repair can still be upto $5k AU some people have noted!
    • Hi, i got 1998 r34 4 door auto abs model and its manual converted with bigbox when i bought it . I successfully find the neutral and reverse light wire but can’t find the speed signal wires for speedo drive. I know its grey plug but on my loom no grey plug with 2 wires . I opened the loom upto where it getting branch with other wire, i’m amazed they is no wire. So need help how to fix the speedometer problem. I search on google it says some r34 model measure speed from diff sensor. Is it right? I talk to a wrecker he say no this isn’t right, i’m kinda stuck. Please help
×
×
  • Create New...