Jump to content
SAU Community

Recommended Posts

we finally have a good 999 car.... eddie decided using other people's crap was too hard so he purchased quite a nice Emo 8, all prepped up :)

i drove said EMO 8 tonight, it's no GTR but nun the less not bad for an EMO

Ignition Module Needed:

Melinda's car (GTR #832) has new engine fitted and dynoed today by the great guys at GT Auto Garage, but it shit the ignition module half way through. finished the dyno with a lend from a customer car, but had to give it back. I have exhausted my contacts in Brisbane, and will try Just Jap tomorrow morning and see if Steve can bring one with him (if he hasn't already left?)

We are leaving for the drive down tomorrow night though, and would be good to know we have one before we set off..

Anyone with any ideas on where to source one

Cheers

Paul

0433 73 44 55

Edited by poolheaters

Ignition Module Needed:

Melinda's car (GTR #832) has new engine fitted and dynoed today by the great guys at GT Auto Garage, but it shit the ignition module half way through. finished the dyno with a lend from a customer car, but had to give it back. I have exhausted my contacts in Brisbane, and will try Just Jap tomorrow morning and see if Steve can bring one with him (if he hasn't already left?)

We are leaving for the drive down tomorrow night though, and would be good to know we have one before we set off..

Anyone with any ideas on where to source one

Cheers

Paul

0433 73 44 55

yeah the Just Jap guys have not left yet, give them a bell I'm sure they can bring another spare down.

Ignition Module Needed

Thanks for all for the replies guys, great response from the rally community!

We have a couple of leads to chase today in Brissy and and I'll ring the Just Jap guys today as well. Also a couple of modules waiting in Hobart if we need them..

Cheers

Paul

I'm arriving in Lonnie saturday. Will have the customary piss up at the Olde Tudor saturday arv/evening.... and this time, Dicky Johnson is joining us :)we finally have a good 999 car.... eddie decided using other people's crap was too hard so he purchased quite a nice Emo 8, all prepped up :)

I heard it comes complete with Bibles and Holy Water.....

A little off topic, especially considering the timing, but I'm going to Tassie with my car (on the boat) in the couple of months. I'm staying at Coles Bay for a couple of nights and won't be straying too far once there. I've got 3 hours to kill on arrival before my wife flies in, and then there is the journey to / from Coles Bay plus any worthwhile detours I could consider. I'm looking for some fun driving roads and thought if anyone would know it'd be the Targa crew.

If you've got any suggestions then perhaps PM so we can keep this thread clean(er).

Cheers.

That's easy Nick, take a run up the east coast to The Sideling, or any of the roads around Elephant and St Mary's Pass. Download a Targa Map and cross reference it, not hard to find great roads in Tas! :D

Edited by Marlin

Ignition Module Needed

Thanks for all for the replies guys, great response from the rally community!

We have a couple of leads to chase today in Brissy and and I'll ring the Just Jap guys today as well. Also a couple of modules waiting in Hobart if we need them..

Cheers

Paul

I have one I am not using for the next couple of weeks in Melb if you need it. Pretty sure it's at Racepace in Bayswater if you can drop past there and grab it.

Drop me a message if you need it i'll call ahead and make sure its there.

Yeah they're not exactly rare Paul, I'd assume you'd have one by now?

Yeah you wouldn't think so Woo but trying to get a good one locally yesterday was near impossible. Thanks to the JustJap boys and the Hobart connection at Moonah Auto Spares, there will be a couple waiting for us in Launceston.

It split the front turbo oil drain pipe on its last dyno run today, and had to get that from Sydney too, not a one to be found here..Hopefully that's the last of the issues?

Leaving at 5.00 in the morning, see you all in Tas

Yeah you wouldn't think so Woo but trying to get a good one locally yesterday was near impossible. Thanks to the JustJap boys and the Hobart connection at Moonah Auto Spares, there will be a couple waiting for us in Launceston.

It split the front turbo oil drain pipe on its last dyno run today, and had to get that from Sydney too, not a one to be found here..Hopefully that's the last of the issues?

Leaving at 5.00 in the morning, see you all in Tas

Well it's my module your getting from Moonah Auto Part's, Troy's taking it and your fuel drum's up to lonnie on friday

if you need anything else my car is apart on the hoist, so you can borrow most thing's, it's kinda like Noah's ARK

there's 2 of everything in my workshop at the moment, 2 engine's, 2 gearbox's, 2 diff's, there's shit everywhere...

Well it's my module your getting from Moonah Auto Part's, Troy's taking it and your fuel drum's up to lonnie on friday

if you need anything else my car is apart on the hoist, so you can borrow most thing's, it's kinda like Noah's ARK

there's 2 of everything in my workshop at the moment, 2 engine's, 2 gearbox's, 2 diff's, there's shit everywhere...

Thanks heaps Burgz. hopefully we won't need it but good to have a spare. The one JustJap Steve is bringing down is straight off his car & proven good. He has changed to a R34 setup bacause he was sick of these failing all the time. Catch up with you for a beer down there..

Cheers

Paul

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...