Jump to content
SAU Community

Recommended Posts

just to clarify....I run a normal, aftermarket pump, not an external pump/wet sump. Neither Targa nor production cars allows external pump, and in any case I am not convinced a oil pump belt is reliable in the sort of things you can do to a car at targa (potato field anyone?)

Well take Ayres out of the field too and EM is there for the taking next year.

Couple of white rs Evo 7's in the field might not make it a walk in the park.

Tony Warren will be a serious contender and I believe Mr Rickards car has had a fairly extensive overhaul, with reliability on his side he will also give it a good shake.

Was talking to Kel at the Symmons on the weekend, and she thought that Adam had lost his sponsorship, and wouldn't be running next year.

He has spent A LOT of money on that car and couldn't keep it up this year. That's a whole lotta car just sitting there so best to pass it on :)

WE will be back :whistling:

Apparently there was a tarmac rally here in the west on the weekend.... :whistling:

Steve Jones 1st,(35 GTR) Team Sims second, (35 GTR) and Jim Richards 3rd by about 5 secs. (Porkchop) The Rullo GTR was up the pointy end for most of the rally (would have been GTR 1,2,3) but suffered gearbox fail. Word on the street was it was making pretty good power. ;)

Why is there such a lack of interest in this particular event you reckon Blaise?

Is it just us sour faced eastern stater's, or is the nature of the rally not particularly enticing?

I've not attended the rally, never really had the desire to either.

^^^ Good question Woo. I havent competed in it and havent bothered to, even as a local. My reasons were mainly shite bang for buck, ($ per competitive km) average roads by comparison to eastern states offerings and repeated stages, and what I consider as stoopid CAMS rules. I built my old car with the idea of bringing it east, so it was built to Octagon spec. Having to detune/spec it to run locally seemed a waste of time. And dollar for dollar, I could ship myself and the car east and run high country which has more competitve KMs and IMHO better quality roads and field, for much the same cost as doing the local event. No brainer for me.

But I dont have first hand experience. Matt who has codriven for Snowy in all 3 east coast rallies and has also co driven a couple of Targa Wests really rates it. But can you really trust anyone who has owned a Honda Jazz? :)

^^^ Good question Woo. I havent competed in it and havent bothered to, even as a local. My reasons were mainly shite bang for buck, ($ per competitive km) average roads by comparison to eastern states offerings and repeated stages, and what I consider as stoopid CAMS rules. I built my old car with the idea of bringing it east, so it was built to Octagon spec. Having to detune/spec it to run locally seemed a waste of time. And dollar for dollar, I could ship myself and the car east and run high country which has more competitve KMs and IMHO better quality roads and field, for much the same cost as doing the local event. No brainer for me.

But I dont have first hand experience. Matt who has codriven for Snowy in all 3 east coast rallies and has also co driven a couple of Targa Wests really rates it. But can you really trust anyone who has owned a Honda Jazz? :)

Lolz

I think the big negative for us eastern states besides the above mentioned is its a big cost to get over there just for one 3 day event and there is nothing else to do. Sure if you are coming from WA you can do THC in november and arrange to leave your car somewhere in vic/tas and there is another 3/4 tarmac rallies you can do in the space of 5 months.

^^^ Spot on Timmy. I woudlnt bother. They almost capitulated this year and allowed Octagon spec cars, but I am guessing there might have been pressure from locals without octagon spec cars to not let them play. It certainly cost them entries as a coupe of guys I know pulled the pin. My old car ran in "invitational" class. Pay the same money but dont appear in the official results. Fail!!

For locals, IMHO is a much better option to do as you suggested. Ship it east the once, and pick up a few of the shorter rallies. Next to no need for support crew. Just turn up with a well prepped car, tip fuel in it and have a laugh.

Edited by Darkside

4 (?) years too late ^^^^^ and they were Clayton tarmac rallies.

Local plod at the final event even suggesting (seriously!) route should be lined with barriers.

NSW, probably less suitable for these events, unless you like corpses littering high speed sections, although WA seems to get away with their series of drag straights somehow....what I've seen on the box anyway.

Yeah I did East Coast Targa in 2004..... started in Sydney and finished in Bathurst.

Was some pretty good rural roads used, but as it was against the rules to use pace notes I thought it simply far too dangerous if you wanted to push for a finish (we founds ourselves gambling on what was over the crest or how tight a corner was).

Evidently the top finishing guys were still using pace notes, but no one was checking as far as I could tell.

One fellow was killed right in front of us when his Posche left the road hard...... that really took its toll mentally. Never again will I do a road book only tarmac rally. The speeds are just too great. It's a completely different story on gravel, different discipline.

although WA seems to get away with their series of drag straights somehow....what I've seen on the box anyway.

WA courses are littered with chicanes and limited speed zones to get the speed down to the 132kmh average. Its wank IMHO. Go as fast as you can...oh except for this bit where you have to slow down to 60 kmh for a while and then speeed up, then do a slalom, and then a chicane... I kind of agree with the philosophy that a chicane can turn a safe straight stretch of road into a dangerous one. I really like the idea of 3,2,1 GO and just go as fast as you can til the finish.

Woo, that would have been horrible to witness. Also am a big fan of pace notes. Really helps keep you safe if you use them right. Wouldnt bother with Targa NZ.

WA courses are littered with chicanes and limited speed zones to get the speed down to the 132kmh average. Its wank IMHO. Go as fast as you can...oh except for this bit where you have to slow down to 60 kmh for a while and then speeed up, then do a slalom, and then a chicane... I kind of agree with the philosophy that a chicane can turn a safe straight stretch of road into a dangerous one. I really like the idea of 3,2,1 GO and just go as fast as you can til the finish.

Woo, that would have been horrible to witness. Also am a big fan of pace notes. Really helps keep you safe if you use them right. Wouldnt bother with Targa NZ.

Yeh and those restricted speed zones are a joke, if your a km over you get a penalty, but if you go a few km's slower you lose seconds to other competitors if you don't get it spot on. Not exactly racing!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...