Jump to content
SAU Community

Recommended Posts

do they scrape on your guards

even though the car has been lowered 30mm, the fronts are fine but the rears had to be rolled.

Otherwise it would be chopping my tyres everytime i hit a bump/go over speed bumps.

The rear tyres are 275's an are stretched, which helps less scrubbing.

Hi guys.Im new on here but have been browisng SAU for awile now and just recently signed up.Here are some pics of my 03 V35 6spd manual with factory Brembos that i thought id share with you all.Purchased it stock as a rock and have had it for just over 14 months now and im loving it :blink: ,im sure you guys are aswell....

Mods iv'e done so far are:

K sport coilovers.

5zigen Pro Racer catback exhaust system.

Sprint Booster.

Top fuel metal mesh air filter element.

Project MU brake pads.

Tinted windows and painted the mesh in the front bar....

1st pic with my stock wheels on.

2nd pic with my WORK Varianza SC1. 18 x9 +30 F (Got 20mm spacers), 18x10 +20 R.

3rd pic with my RAYS NISMO LMGT1 (all white). 18x9.5 + 14 all round.

Enjoy the pics guys :)

Cheers..

post-70528-1266989002_thumb.jpg

post-70528-1266989261_thumb.jpg

post-70528-1266989477_thumb.jpg

post-70528-1266989763_thumb.jpg

Edited by vQ350gT

Thanks mate.I know what you mean about the black marks and i havent had any issues yet.The 5zigens have been on the car for awile.Actually i got them installed on the 2nd day i got the V.I got it installed sittiing flush to the rear bar as i didnt want it sticking out.They weren't really the zorst system i wanted but i was limited to options.

Here's the dish.The fronts looks too plain as they dont have dish.But they look good with the 20mm spacers..It kinda looks like the wheels are sunken in compared to the rear :) ...The pics are without spacers..I wasnt feeling the WORKS soo i got the LMGT1s and they are stayin on..

post-70528-1266992990_thumb.jpg

Edited by vQ350gT
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...