Jump to content
SAU Community

Recommended Posts

Matt,

A Kaaz centre is definately on the cards and i will doing everything possible to straighten my wheels up (has a bit of camber because of the coilovers at the moment even after a wheel alignment). Yeah i think your right about traction in fourth, going to struggle no matter what i do in the first three gears me thinks (especially when the cool air comes).

Did you manage to get the 14th free for westys dyno day mate?

Lee

Mate, if I have traction issues in 3rd, with the A/C on full blast, on a 37-39'c day, running 275 MT Radials, about -0.3 rear camber, and with less grunt, you've got no chance ha-ha. Cool temp's are going to be interesting.

It's not looking all that good at the moment. How long have I got before they close the entries? Knowing my luck I won't be free... and 3 to 4 days out the schedule will change and I will be free!

Congrat's Hamish. Nice result! Nice and responsive too.

Mate, if I have traction issues in 3rd, with the A/C on full blast, on a 37-39'c day, running 275 MT Radials, about -0.3 rear camber, and with less grunt, you've got no chance ha-ha. Cool temp's are going to be interesting.

It's not looking all that good at the moment. How long have I got before they close the entries? Knowing my luck I won't be free... and 3 to 4 days out the schedule will change and I will be free!

Congrat's Hamish. Nice result! Nice and responsive too.

I hear ya with the traction issues.......

Theres still 10 spots left and i think entries close 12th March. Altho if spots arent full by then i would guess you can pay on the day.

http://www.dynoday.info/

All this E85 talk wants me to try it now, is there any news on how E85 will be expanding around the country? Is it ment to be becoming more readily available? I think it's going to take ages until we get some up here, even though we pretty much grow all the sugar canes! :glare:

Edited by PM-R33

Ran the car up quickly on the dyno this morning (1 power run only)to see what gains (if any) the new injectors,pump and actuator have made.

Just to recap.

Swapped out nismo 555's for sard 850's.

Swappd out Nismo pump for 044 intank.

Replaced 10psi actuator for 18psi one.

Previously the car made 337 with AFR's between 12-12.5 and spiking to 24psi trailing to 19psi (injectors at 100% duty)

This time the car made 346.6 with AFR's between 11.5-12 and spiking to 26psi trailing to 22-23 psi (injectors at 91% duty) will raise base pressure when i receive my fpr.

We will lean on it a bit more for the upcoming dyno day but very happy with the current tune.

Will post dyno sheet in the next day or so.

Lee

Guilt-toy, why don't you try running 50% BP Ultimate and 50% E85? That should give you more power out of the injectors compared to 100% E85 but more power than the BP Ultimate because of the higher octane rating. If you max out your injectors too early, try slightly lowering the boost until the injectors max out right on redline. Should be good for 400 i reckon!

It'd be a pain in the ass mixing it all the time but i reckon it'd be the perfect balance, especially considering you max out your injectors too early on E85.

Edited by bradsm87
Ran the car up quickly on the dyno this morning (1 power run only)to see what gains (if any) the new injectors,pump and actuator have made.

Just to recap.

Swapped out nismo 555's for sard 850's.

Swappd out Nismo pump for 044 intank.

Replaced 10psi actuator for 18psi one.

Previously the car made 337 with AFR's between 12-12.5 and spiking to 24psi trailing to 19psi (injectors at 100% duty)

This time the car made 346.6 with AFR's between 11.5-12 and spiking to 26psi trailing to 22-23 psi (injectors at 91% duty) will raise base pressure when i receive my fpr.

We will lean on it a bit more for the upcoming dyno day but very happy with the current tune.

Will post dyno sheet in the next day or so.

Lee

post-46183-1236143498_thumb.jpg

Edited by RB25DETS2

well after nearly 2 weeks on e85 i have made the executive descision that i will simply travel to whoop whoop once a week to fill up my car and 2 jerrys...

do not wanna go back to 98! :bunny:

we'll see how long before i get jacked of that :)

Yet another outstanding result, Lee. Congrat's. And to think, only a few months ago it was making almost 100rwkw less :bunny:

It looks like the 3037 (0.68) is starting to reach the limit with your current set-up (cams/head etc) given the mild 9-10rwkw gain from a 3-4psi increase in boost. But with near enough to 350rwkw, and very good response, you couldn't ask for much more.

Time to upgrade those cams now.

Yet another outstanding result, Lee. Congrat's. And to think, only a few months ago it was making almost 100rwkw less :)

It looks like the 3037 (0.68) is starting to reach the limit with your current set-up (cams/head etc) given the mild 9-10rwkw gain from a 3-4psi increase in boost. But with near enough to 350rwkw, and very good response, you couldn't ask for much more.

Time to upgrade those cams now.

Thanks Matt definately couldn't ask for more.....The 337 dyno was running a fair bit leaner so i guess if i was to run the current set up as lean there could be a few more kw hiding. I definately think the turbo and manifolds are getting very close to their limit.

As for cams they can wait until the engine needs to be opened (altho would be nice), time to enjoy it me thinks....

Did you manage to get the 14th off mate?

Lee

Not bad for stock cams and stock manifolds!

Yep, I'm good to go for the 14th. I'll have to get my entry in. However, there's one slight issue, one that may or may not be a show-stopper for me, my rear rubber. MT ET's don't handle knurled dyno rollers well at all, and I'm not all that keen on stuffing around swapping rears for the sake of a quick dyno shootout.

I'll have a chat to Shaun and see if he reckons they can give an accurate reading for one or two quick runs. We had to borrow a set of 'normal' rubber for the recent tune work.

I'll be at the dyno day no matter what, it's just a matter of will I or won't I run the '33.

Not bad for stock cams and stock manifolds!

Yep, I'm good to go for the 14th. I'll have to get my entry in. However, there's one slight issue, one that may or may not be a show-stopper for me, my rear rubber. MT ET's don't handle knurled dyno rollers well at all, and I'm not all that keen on stuffing around swapping rears for the sake of a quick dyno shootout.

I'll have a chat to Shaun and see if he reckons they can give an accurate reading for one or two quick runs. We had to borrow a set of 'normal' rubber for the recent tune work.

I'll be at the dyno day no matter what, it's just a matter of will I or won't I run the '33.

The Mickey's wont handle the dyno...they will shred rubber like a black hailstorm behind the car...ive seen it 1st hand with my car.

GuiltToy you said PFC knock detection was not up to scratch (can't find the original post now) but is the problem with the PFC hardware or software or the nissan knock sensors or all of the above? If I get a Link/Vipec will it function OK with the Nisssan knock sensors? I know that Link have a knock detection system as well - should I get their sensors or do i need to get a Gizzmo K-Mon to accurately set timing? (it's sort of on the subject ...I want to use an ethanol blend and do the tuning myself - I have a wideband meter).

well after nearly 2 weeks on e85 i have made the executive descision that i will simply travel to whoop whoop once a week to fill up my car and 2 jerrys...

do not wanna go back to 98! :D

we'll see how long before i get jacked of that :banana:

where are u going, werrabie??

GuiltToy you said PFC knock detection was not up to scratch (can't find the original post now) but is the problem with the PFC hardware or software or the nissan knock sensors or all of the above? If I get a Link/Vipec will it function OK with the Nisssan knock sensors? I know that Link have a knock detection system as well - should I get their sensors or do i need to get a Gizzmo K-Mon to accurately set timing? (it's sort of on the subject ...I want to use an ethanol blend and do the tuning myself - I have a wideband meter).

standard knock sensors are only good for 220rwkw. if you have more power then that then you need to change them. if you have a GTR then those knock sensors are better.

I would buy new vipec ones if you cannot afford a k-mon

standard knock sensors are only good for 220rwkw. if you have more power then that then you need to change them. if you have a GTR then those knock sensors are better.

I would buy new vipec ones if you cannot afford a k-mon

[/quote

just got my first 40l of e85 from united rozelle, does anyone have any tips on tuning to pass epa. i went last month and failed on 98.

the guy let me have a third run and i change my timing map up 3 degs and i fail worse than before,guess i should of gone down 3 degs lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...