Jump to content
SAU Community

If You Could... Porsche Or Gtr


Recommended Posts

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

Because Ive owned many Nissans including GTR, although not the 35 which I contemplated buying before getting my 6 series. Also I have easy access to the 35 here in Japan and my boss owns a Porsche.

The biggest 2 difference for me is the quality and at the end of the day knowing that its only a Nissan which anyone can buy. But thats is after living in Japan for 4 years. Unlike when I was in Australia, I see a GTR now and I dont even take much notice honestly. :D

I asked why they changed back buddy.

I asked why they changed back buddy.
After a few months, they all switched back. :D When asked why, they said after you (get use to) the thrill of the straightline accelaration and hype goes out, they prefer the Porsche which I can understand.
Edited by N/A®

well I can understand that. a GT2 or GT3 is a hell of a lot of car. The R35 is super impressive but it's an 8mil yen car VS the two Porsche's at 4 times that.

If money is no object I'd probably take a 911 turbo over an R35 and same goes for the GT2 and GT3 too. In fact of the three I do have a soft spot for the GT3.

BUT in the real world I live in, and with a budget to consider the R35 is a damn good deal. it's nearly porsche good for nissan money.

Anyone going on about lower GTR build quality obviously hasn't seen/touched/driven one, they're beautifully finished, with excellent materials, SO much better than any Nissan before.

Hell yeah, the car is built so well and very solid.

My choice would be a new 370Z, then spend whats been saved on hookers and coke :banana: Or else a turbo kit and a few other goodies.

Far more satisfying and interesting than paying lots more for something that is grossly overpriced like the Porsche or over teched like the R35. Having said that the GT-R would be better to drive near the limits than the P car, according to most reports.

well I can understand that. a GT2 or GT3 is a hell of a lot of car. The R35 is super impressive but it's an 8mil yen car VS the two Porsche's at 4 times that.

If money is no object I'd probably take a 911 turbo over an R35 and same goes for the GT2 and GT3 too. In fact of the three I do have a soft spot for the GT3.

BUT in the real world I live in, and with a budget to consider the R35 is a damn good deal. it's nearly porsche good for nissan money.

I agree completely.. but isnt the Spec V pricing insane!!

Edited by N/A®
Anyone going on about lower GTR build quality obviously hasn't seen/touched/driven one, they're beautifully finished, with excellent materials, SO much better than any Nissan before.

The last point is true but personally I dont think the first is correct. This is just my personal opinion only.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...