Jump to content
SAU Community

Recommended Posts

Single 4Gb 670 > dual 660s. 660s will give marginally better performance (~5%) but not nearly enough for the cost (~$250 more to go two 2Gb 660s over a single 4Gb 670) and potential headf**kkery of SLI cards. It also leaves you nowhere to go in future if required. Put the $250 towards a 1440 monitor (Catleap).

Microstuttering, screen tearing and simple refusal to play ball FTL.

Also stick with 1600mhz ram.

Main

Case: Corsair 800D
Motherboard: ROG R4E
CPU & CPU Cooler: Core i7 3820 OCed
RAM: 32GB G.Skill RipjawZ 1600mhz
Monitor: 2x Overlord Tempest OC, 120hz 27" IPS 1440p
Graphics Card: 2x GTX 570s SLI
HDD(s): Raid 0 2x Crucial M4s 256gb, 2x Hitachi 2TB 7200rpm storage drives
OS Used: Windows 7 Pro
Peripherals: Mionix Naos 8200, Ducky Shine with Cherry MX Blacks, AD700, xbox 360 controller

Server

Case: Lian Li A77F
Motherboard: Asus generic z77
CPU & CPU Cooler: Core i3 3220
RAM: 16GB Kingston ram 1600mhz
Monitor: None
Graphics Card: onboard
HDD(s): 12x 3TB Toshiba 7200rpm RAID 6, 5x 2TB Hitachi 5400rpm RAID 5

OS Used: Windows server 2008 R2

Peripherals: hardware raid card, dual gigabit NIC

LAN

Case: Fractal Arc Mini
Motherboard: ROG M4G
CPU & CPU Cooler: Core i5 2500k OCed
RAM: 16GB Corsair Vengeance 1600mhz
Monitor: 2x 24" Benq
Graphics Card: GTX 560 TI
HDD(s): Crucial M4, Hitachi 2TB 7200TB
OS Used: Windows 7 Pro
Peripherals: Coolermaster tenkeyless Cherry MX red, Logitech G5

Single 4Gb 670 > dual 660s. 660s will give marginally better performance (~5%) but not nearly enough for the cost (~$250 more to go two 2Gb 660s over a single 4Gb 670) and potential headf**kkery of SLI cards. It also leaves you nowhere to go in future if required. Put the $250 towards a 1440 monitor (Catleap).

Microstuttering, screen tearing and simple refusal to play ball FTL.

Also stick with 1600mhz ram.

Thanks for the advice :)

From all the real-world comparisons I've read, twin 660s will outdo anything except a 690 and seeing as I already have one 660, I'd rather pay $230 for a second one than pay over a grand for a 690... I've seen microstutter mentioned on a few forums but no-one seems to go into any depth about what it actually is - only that it's rarely noticeable on most decent mobo/GPU setups?

As for the RAM, that was a typo sorry - I already came to that conclusion myself because ivy bridge doesn't seem to utilise higher RAM speeds :(

Oh and I have no desire to change my monitor as it would involve buying a computer desk and chair and sacrificing sitting on the couch... My computer is my TV :)

SLI works a lot better than you'd think actually, I had 2x GTX 460's for a while. Found the lack of video ram and the fact that Nvidia don't optimise new drivers SLI profiles for older cards to be the biggest problem (i.e about a year after release only the 5xx cards were having optimizations done).

The amount of scaling that you'll get depends from game to game as well (compared to one single powerful GPU). I also recommend both having a decent sized case, and using reference cards.

Microstutter is more an issue for tri SLI and AMD Crossfire setups; I wouldn't worry about it.

Buy the fastest rated RAM with the loosest timings for the best price, it'll make more of a difference than latency these days, but neither is it really worth spending big dollars on

Dave reference cards are the basic cards

Before people like sapphire etc get ahold of them and add OCing and better fans.

They are pretty much the platform for the card when it's first released. Most of the time they have pretty basic fans etc on them

Newly upgraded build:

CPU: i7 3770K

GPU: sapphire HD 7950 OC V2

Ram: 8gb

Motherboard: ASrock Z77 pro3

PSU: Antec High current gamer 620W

Upgraded this yesterday with a fresh install of windows 7. Later down the track I might start looking into how to OC but for now I think this should be fine.

Getting a stable 50-60fps on ultra on battlefield 3

Got myself a second hand Dell Precision T3500 for cheap and upgraded some stuff.

CPU: Intel Xeon W3520. Quad core, HT, 2.66GHz turbo mode to 2.9GHz

GPU: Gigabyte 2GB GTX650Ti (originally had a lower end Quadro card)

RAM: 24GB Kingston

HDD: 2x 500GB WD Blue

OS: Win7 Pro x64

Case: Antec 300
Motherboard: Asus M5A99X EVO R2
CPU & CPU Cooler: AMD 955 black O/C 3.7ghz, Corsair H55 Hydro

RAM: 8gb Patriot Viper 1600mhz
Monitor: 24" Asus
Graphics Card: MSI 7870 O/C
OS Used: Windows 7 Pro
Peripherals: Logitech G110 keyboard, MX5500 Mouse, Z2300 speakers.

Edited by HR31_RB20DET
  • 5 months later...

this is my set up at the moment

Case: NZXT switch 810
Motherboard: Asus p8z77 - m
CPU & CPU Cooler: intel i7 3770
RAM: G.skill ripjaws-z 2133mhz 4gb x4
Monitor: soniq LED 40 " tv & soniq LED 32" tv
Graphics Card: Gigabyte gt 640 OC
HDD(s): Seagate 120gb SSD, seagate 1TB HDD
OS Used: win 7
Peripherals: logitech wireless mouse and keyboard

I've just added a Thermaltake Extreme 2.0 water cooler and a 250Gb Samsung 840 SSD to my system. I've not got 430Gb or SSD installed :)

The TE2.0 is pretty sweet. I didn't do any before and after but probably should have. It's also surprisingly quite. I was expecting it to be loud but it's not, even under load.

Built this computer 5 months ago, thinking i was gunna get back into games... now it plays music and browses the web lol



Case: thermaltake armour


Mobo : asus p8z77-v deluxe


Cpu: Intel I7 3770k @ 4.8ghz , 1.42v.. de-lidded with thermaltake water 2.0 extreme


Ram: Corsair vengance 2 x 8gb sticks


Gpu: 2x Asus gtx680 4gb in SLI @ +116mhz core , +266mhz gpu mem


Psu: Corsair HX850


Logitech g510 and thermaltake level 10 mouse


post-42929-0-46363600-1379205555_thumb.jpg

post-42929-0-52246100-1379205587_thumb.jpg

  • Like 1
  • 1 month later...

Just an update, I've now been running my new setup for over 6 months and I have to say I have NO regrets! Everyone talking about issues with SLI must be basing it on experiences with crap cards cos I haven't had a single issue and setting it up requires absolutely no hassles (it prompts you to activate SLI when you first fire up windows). I have been trying to find a game that will push my cards but nothing I throw at them seems to bog them down. I max out all my settings on Prototype 2, Skyrim, Fallout NV, Civ V, etc and it runs a charm. My windows experience score is 7.9 too.

  • 2 weeks later...

are you playing BF4 ok with it? haha.

just ordered a 780 for some ultra 2560x1440 goodness! :)

(coming from a 660ti) so should hopefully be about double performance, the 660ti is going alright with BF4 on high I must admit but you do get the occasional explosion lag or water lag.

ruled out the 290s because of the noise / heat reports, even if they keep up you can't overclock them if you wanted to like you could with a 780

Edited by UNR33L

Hey guys just wondering if anyone in here can help me out.

I recently bought a 7970 for BF4 in my old rig, and whilst I got a decent boost I am nowhere near 60fps on high settings. I did a graph thing while running BF4, and apparently the CPU is up the shit.

https://www.dropbox.com/s/sfnqv63p5q...Win32-0001.png

I have a Gigabyte MA790Gp Motherboard. Would an AMD 8320 CPU fix my frame rate issues? Are there better CPU's to choose from? Is the motherboard itself causing issues also? What's the benefit of replacing it? Also I was going to chuck in another 4GB of ram.

Here's my system:

AMD 955 Phenom
4GB DDR2 ram
ATI Radeon 7970
Gigabyte MA790Gp Motherboard
Seasonic M12 80plus 500Watt. PSU

Thanks guys

Not sure if 1 780 would be great at that reso . My sli gtx680 4gb struggle on the dam level on ultra at only 1080.. V sync on though..

and to the above post id say deff try more ram . From memory my pc uses about 5gb with my normal apps open and bf4, plus if u get more ram u could turn ur page file off

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...