Jump to content
SAU Community

Recommended Posts

Not that I've driven one yet, but when I was reading Racq magazine (queensland), they quoted the 0-100 times of the 270kw wagon as 7.1 seconds. Pretty sure that a stock m35 is atleast the same (despite shitty off the line). Given the fact it was raining, the awd Stag would fair pretty well at least for the 1st couple of hundred metres.

Pretty sure the official 0-100 figure for the M35 is around 7 seconds - not sure what the average driver would be able to acheive in practise though. But yes, should be close, with the advantage going heavily to the M35 in the wet.

Pretty sure the official 0-100 figure for the M35 is around 7 seconds - not sure what the average driver would be able to acheive in practise though. But yes, should be close, with the advantage going heavily to the M35 in the wet.

If my memory serves me correctly, I am pretty sure that Jetwreck performed three 0-100kph runs and averaged around 6.8secs.

Pretty sure that he only had aftermarket suspension at the time (stock boost, turbo etc)

Went to a holden dealer the other day to look at a patrol, the salesman said is that a camry wagon? :)

i was like um nah cya then gave it some 8000rpm love as i left and watched all the salesmans faces :D

Went to a holden dealer the other day to look at a patrol, the salesman said is that a camry wagon? :D

i was like um nah cya then gave it some 8000rpm love as i left and watched all the salesmans faces :O

Jeez, 8000rpm in a front wheel drive... Must have been a fair bit of smoke! :P

Camry Wagon? Lol. Gotta love these "car experts".

Glad they are the ones that decide the trade-in value! :)

Hahaha, the problem with a majority of car salesmen is that they're probably employed purely on their sales success instead of how much they love their products and cars in general.

  • 2 weeks later...

Pulled up to a servo and was filling the tank when a black Prelude rolled up.

Must have had a condescending grin on my face because as I walked past the guy to go and pay he gave me a bit of "Wot tha F*ck yoush lookin' at bro? Mi VTEC wiw kiw dat Volvo shid!"

Laughed heartily as I walked into the servo.

Why the condescending face?

Black '92 Prelude, copy of an AB Flug body kit, stock wheels, 6" tacho, Cannon tip, not to mention the electric blue windscreen wipers. :)

Edited by iamhe77
  • 3 weeks later...

That's Hilarious.....off topic...

I drag'd a 92/93 prelude in my Pop's Nissan Micra (5spd man, 1.8/1.6ltr? twin cam)

a couple years back and left the tool for dead.

The little bubble chirped in 1,2,3rd....vroom.

I was in hysterics that the little economic bubble could beat a supposed sport car.

Pulled up to a servo and was filling the tank when a black Prelude rolled up.

Must have had a condescending grin on my face because as I walked past the guy to go and pay he gave me a bit of "Wot tha F*ck yoush lookin' at bro? Mi VTEC wiw kiw dat Volvo shid!"

Laughed heartily as I walked into the servo.

Why the condescending face?

Black '92 Prelude, copy of an AB Flug body kit, stock wheels, 6" tacho, Cannon tip, not to mention the electric blue windscreen wipers. :)

That's Hilarious.....off topic...

I drag'd a 92/93 prelude in my Pop's Nissan Micra (5spd man, 1.8/1.6ltr? twin cam)

a couple years back and left the tool for dead.

The little bubble chirped in 1,2,3rd....vroom.

I was in hysterics that the little economic bubble could beat a supposed sport car.

Hahaha, specs on the Micra work even more in your favour - it's most likely a 1.4ltr!!!

V-TEC?

NO!

my gf said to me the other day....

thought i saw you near my house.. it looked so much like your car from behind.., then i saw the front..

i'm like 'yeah it was probably a volvo??'

'yeah thats exactly what it was'.

mistaken identity :D

I had my first, what kind of Volvo is this moment from my father in laws mate, who as it turns out is a doosh-bag.

he preceded to attempt to convince me that buying an import was a crazy idea because i couldn't get parts for it especially a Nissan because they are crap. Not long later his daughter and her boyfriend turned up in a VL turbo and he said. "Now that's a car, Australian made yadda yadda." I was so embarrassed for him.

Why do i know these people?

I had my first, what kind of Volvo is this moment from my father in laws mate, who as it turns out is a doosh-bag.

he preceded to attempt to convince me that buying an import was a crazy idea because i couldn't get parts for it especially a Nissan because they are crap. Not long later his daughter and her boyfriend turned up in a VL turbo and he said. "Now that's a car, Australian made yadda yadda." I was so embarrassed for him.

Why do i know these people?

Please, please, please tell me you asked him who made the engine for it.

Please, please, please tell me you asked him who made the engine for it.

Yeah, he took some convincing. I wish i had thought of it at the time, but what i should have said was...

"you RB-ing an idiot."

See what i did there. :rofl:

  • 2 weeks later...
i keep thinking that i've spotted M35s..... but they never are once u get closer.. just volvos :D

hahaha! Yeah I thought I spotted a R34 GT-t in Mt Eliza the other day. It was parked waaaaay down the end of the street facing me.

When I got closer, it was a lowered Camry with an aftermarket front bar :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...