Jump to content
SAU Community

Recommended Posts

hi guys im currently building a 400+kw rb25/30 retaining vct

my head is currently being machined and I need to know what the maximum diameter is that I can drill out the head oil drains?

I have a -12 headoil drain also and restrictors etc but I will be doing the above also, any info or feed bad muchly appreciated

Corey

I understand 10mm but haven't done it myself. You also have to relieve the tops of those holes and the other drains.
  • 5 months later...

Hi, i know this has been asked but i haven't seen an answer to it, has anyone got the internal VCT feed working and controlling oil issues to the head on a track engine?

what feeds are people running to the head when not using an external VCT but the internal drill feed method?

Hi, i know this has been asked but i haven't seen an answer to it, has anyone got the internal VCT feed working and controlling oil issues to the head on a track engine?

what feeds are people running to the head when not using an external VCT but the internal drill feed method?

Ive never had this mod running tried it on two different engines with 1.5mm Restrictors and n1 oil pumps.

ended up doing the tried and proven method of external oil feed.

Hi, i know this has been asked but i haven't seen an answer to it, has anyone got the internal VCT feed working and controlling oil issues to the head on a track engine?

what feeds are people running to the head when not using an external VCT but the internal drill feed method?

I am not sure if the internal VCT feed method got past the great theory stage. I have seen a couple of people who have tried and failed - don't remember seeing anyone who has actually done it successfully. Anyway don't really see how it relates to oil control problems - you still need restrictors at least and with RB30s I would say you need sump breathers.

hey guys im deleting vct on my 25/30 still running hydraulic lifters though, iv removed and plugged the vct solenoid in the head, obviously the bottom of the head is welded (the vct feed area). and I have 2x 1.2mm oil restrictors is there anything else I need to do?

  • 3 months later...

Hey I read on the Webbers guide page for oil feed mods and it says " R34 NEO heads can be ran without NVCS as there is a normal oil feed" Can anyone confirm this? Or do you think an external feed should still be done?

Cheers Chris

Hey I read on the Webbers guide page for oil feed mods and it says " R34 NEO heads can be ran without NVCS as there is a normal oil feed" Can anyone confirm this? Or do you think an external feed should still be done?

Cheers Chris

Got a link to the guide you were reading?

Oh ok well I intend on keeping vct. But must have read it the wrong way. So I'll still need the external line. Thanx fellas

I'm not saying the internal feed won't work - just that people on this forum recently have tried and failed. If you look at Webber's site (link above) you'll find instructions on how he did it.

Yea I didn't think u could do it internally. From what I read on webers I was under the impression u didn't have to run a external line, even if u wanted to keep vct as the neo operates a different way. But guess it can't so External it is. Thanks guys

  • 1 year later...

drilled from one feed to the other .. get the angle right or you could end up with oil where you dont want it

attachicon.gifphotos phone 001.jpg

picky of where I drilled between the first 2 (intake) cam journals

attachicon.gifphotos phone 004.jpg

Drilled and tapped the outer layer to take a bung

attachicon.gifphotos phone 009.jpg

Dummy fitted the bung to show what it looks like finished

attachicon.gifphotos phone 011.jpg

Head was then dissassembled for further mods before being cleaned an reassembled

Hope this helps people

Hey I realise I'm digging up an old post but can you (boost is good) or anybody else help with this mod to the neo head?

This is easy BUT how on earth to you prevent getting chips in the oil gallery below that will be spat through the motor in the future? You obviously can't get to the inside of that oil gallery easily so have you just ignored this? Can you take the plug out of the front and the ball bearing and spring etc and clean it out?

I just notice people talking about external feeds on Neo heads again in here, I can't understand why you'd go external if you can do a rock solid internal mod?

  • Like 1

Hey I realise I'm digging up an old post but can you (boost is good) or anybody else help with this mod to the neo head?

This is easy BUT how on earth to you prevent getting chips in the oil gallery below that will be spat through the motor in the future? You obviously can't get to the inside of that oil gallery easily so have you just ignored this? Can you take the plug out of the front and the ball bearing and spring etc and clean it out?

I just notice people talking about external feeds on Neo heads again in here, I can't understand why you'd go external if you can do a rock solid internal mod?

You drill it with the head off and blow it out.

  • 2 weeks later...

absolutely brilliant. i was thinkin of doing this also with mine but there wasnt alot of people willing to try it back then and also time was an issue so i went with external. might have to re-visit this! less points of failure!.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...