Jump to content
SAU Community

Recommended Posts

^^ u should know, your a massive keyboard warrior.

You can't upset me tonight man, Crows beat Port in showdown.

I can't remember, when I looked into the Autronic 3yrs ago for my GTR you still had to run wasted spark.

plugin Links/Vipecs are wasted spark i'm pretty sure, only the wire-ins are sequential

i remember asking Rob @ RIPS about it, said he didn't really see the need unless it was a serious motorsport application.

My Civic had just a little under 400kw.

K20/K26 (JDM K20A2 Head)

Darton MID Wet Sleeves

4 Piston Racing Crank

CP Pistons (9.0:1CR)

Pauter Rods

GT4088

16psi made 520.80hp.

Geesus.. show us your torque steer eh?

Geesus.. show us your torque steer eh?

exactly what I was thinking, being a fwd it would have major traction issues BUT making that power is easy with any engine as it is just an air pump...put a big enough snail on it and it will make the power

the plug in vipec and links are non sequential batch fire. aka z18et spec..

the wire ins are the way to go. the fact you have to hack up a standard ecu case to fit them aswell is a pain..

the haltech is quite good as it has all the built in knock control and is a "plug and play".

rb25 has forged pistons and rods, n1 pump with crank collar and ross "power steering belt flinging" balancer.

the plug in vipec and links are non sequential batch fire. aka z18et spec..

the wire ins are the way to go. the fact you have to hack up a standard ecu case to fit them aswell is a pain..

they have 4 ignition drivers and 8 injector drivers on the skyline plugin and come standard with a 3bar map sensor as of june/july last year (2.5bar before that).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...