Jump to content
SAU Community

Recommended Posts

also factor in the price of interior trim to suit the new handbrake location, plus the pedal box from a Z33/V35. i guess only the clutch is needed + master and slave cylinders and relevant lines (braided would be easy) and installation of said items. there MIGHT not be a hole in the firewall where the clutch master would sit.

better pics of the xfer case on the m35 auto? It looks like a very good match to the R32/33/34 4wd setup. does someone have a 32/33/34 intermediate shaft they can stick into an m35 xfer case?

I tend to think the 32/33/34 box is the way to go, the interfaces are flywheel/clutch/input shaft (do-able), tailshaft (do-able) and intermediate shaft (do-able). I'd be surprised if the d22 navara stuff fits, they would have a very different front diff setup

better pics of the xfer case on the m35 auto? It looks like a very good match to the R32/33/34 4wd setup. does someone have a 32/33/34 intermediate shaft they can stick into an m35 xfer case?

I tend to think the 32/33/34 box is the way to go, the interfaces are flywheel/clutch/input shaft (do-able), tailshaft (do-able) and intermediate shaft (do-able). I'd be surprised if the d22 navara stuff fits, they would have a very different front diff setup

You make a good point Duncan....might have to climb under one and check it out.

The R32/33/34 is pretty do able....only hold up is the bell housing....hence the reasoning behind the Navara scenario.

Leave it Auto, get a valve body upgrade from the states for 180usd, do whatever else needs doing in the auto and get that computer shit going and change the shift times if its possible.

how is that computer tune business going at sas? or wherever it is at now..

Leave it Auto, get a valve body upgrade from the states for 180usd, do whatever else needs doing in the auto and get that computer shit going and change the shift times if its possible.

how is that computer tune business going at sas? or wherever it is at now..

I already have a built box, still cant handle the power I want to run through it.

The ecu remap wont speed up the shifts, they happen instantly with the valve body upgrade, the issue is the throttle which closes during shifts and wont reopen for a bit, even though its in gear. If the SAS remap fixes that, a lot of people will be happy, im going Japanese reflash when I find a spare ecu.

Not all the time, just seems to be on initial application of throttle. If I boot it, at any speed, it takes a while to power on but once it is, shifts are instant and hard. Note that this only seems to happen under 3000 revs.

The damn ecu throttle lag I have been complaining about guys, it isnt that noticeable when stock as it gives a nice acceleration curve, but once powered up its a pain in the arse. Somebody lend me an ecu to send over, please? :)

I notice the throttle lag on the stock car i have.. its kinda annoying really as when you want to boot it. you have to think ahead of everything to do it..

The guys in the states with the same box dont seem to have issues with power? could it be something more m35 car related??

as for the valve upgrade.. it looks good. pretty cheap from the states too. and doesnt look too hard to fit at all. i might look at that to get the shift times a bit better since its only 180usd or there abouts.

I notice the throttle lag on the stock car i have.. its kinda annoying really as when you want to boot it. you have to think ahead of everything to do it..

The guys in the states with the same box dont seem to have issues with power? could it be something more m35 car related??

as for the valve upgrade.. it looks good. pretty cheap from the states too. and doesnt look too hard to fit at all. i might look at that to get the shift times a bit better since its only 180usd or there abouts.

you got the link for it?

Has anyone priced up buying a 2004-2005 manual stagea front cut from a importer?

Might cost up to $5K

Sell off the engine for $2-3K and use the rest

Is it that simple?

Reading the "modify auto posts" sounds like a bandaid fix for a problem that is still going to remain?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What an awesome idea to fit the facelift Lamborghini Diablo headlights. They are a perfect fit!
    • An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
×
×
  • Create New...