Jump to content
SAU Community

Recommended Posts

Before you go and spend in bulk have a look at these

Sandisk V-Mate (~$80 ebay)

Sony 1/3 ccd camera (~$90 ebay)

SD card of your choice

Cables and DC convertor

have a look here

http://www.bmsc.com.au/forums/rallying-tec...ing-system.html

Its a bit diy, but can save a wad of cash

time for a bump :-)

With something like the above, any idea how you would mount the V-mate and it's enclosure?

I want to avoid any drilling/cutting and in most cases will have a full interior?

time for a bump :-)

With something like the above, any idea how you would mount the V-mate and it's enclosure?

I want to avoid any drilling/cutting and in most cases will have a full interior?

Stick it in the Glovebox if your not keen on drilling etc

Yeah, thats' what i was thinking.

Glovebox then stuffed with some rags or something to stop it banging around.

Just gotta make sure i remember to put it in after scrutineering :-) A few places I've been to check the glovebox.

I was talking to the Hutch TV blokes and the cost of their footage was about the same as buying one of those cheap cameras, guessing they are the Go-Pro ones. Given I could buy a camera for the hire charge I didn't see the point but if Go-Pro are rubbish (especially in a rally car) maybe hiring is the way to go!

I took Russ' advice and bought a VIO POV1 from http://www.racerecall.com/pov1.html.

Its the 3rd system I've used but a real winner because its so easy to install and use. And recording to SD card in HD is great.

Now all I need is a video editor that is dead easy and handles widescreen HD footage. I've always used Windows Movie Maker in the past because its easy but it doesn't seem to handle widescreen or HD.

Hey everyone , thought I'd let you know about my little units I bring in from the US, "Archos ", 420 line bullit camera's that record onto either a 30,80,160 or 320 built in HDD or there is a version that has SD card recording as well, These units have a 4.3 inch tft touch screen for seting up and playback, plus can be used for lots of other stuff.

Link below is from a XU-1 on a BSCC Tarmac Rally at Willowbank on the 1st March this year. I use the 30 gig unit myself .

post-5226-1237821398_thumb.jpgpost-5226-1237821416_thumb.jpg

Hey everyone , thought I'd let you know about my little units I bring in from the US, "Archos ", 420 line bullit camera's that record onto either a 30,80,160 or 320 built in HDD or there is a version that has SD card recording as well, These units have a 4.3 inch tft touch screen for seting up and playback, plus can be used for lots of other stuff.

Link below is from a XU-1 on a BSCC Tarmac Rally at Willowbank on the 1st March this year. I use the 30 gig unit myself .

post-5226-1237821398_thumb.jpgpost-5226-1237821416_thumb.jpg

I use one of those. I have a 80gb 605 Wifi w/ DIY extended camera cord. Works good enough for me! the unit is actually a media player..i use it more for that...got mine when i was over in the states last year.

here's my sample -

That looks quite good mate. What sort of money is that setup?

Depending on the hard drive size , starting at $950 for the kit , which includes 12 volt adapter so you can record all day , bullit camera holder and bag.

Brad

Brad, when recroding on the track do you use the hard disc or and SD card?

I was looking at soemthing like this but everyone told me to saty away from the hard disc units as every bump causes it to skip and you loose anything recorded.

it wont skip on every bump, but track use will wreck the Hard disks in most cam corders and DV recorders. the constant vibration and sharp shocks will eventually wreck them. it's purely because hard disks have moving parts, and the platter is spinning at high rpm so all the vibration and sharp bumps don't do it any good. much better to stick with ye olde dv tape, or solid state memory (CF, SD card etc).

how does it compare with the POV kit on quality, ease of use? spec? it's pretty close on price.

it doesnt..video quality of the POV is much better..the difference is that the archos isn't just a video recorder..its a full on media player that does a fair bit that happens to have a helmet cam attachment.

the pov, being purpose built..would be better suited if you were serious about video recording imo.

i paid $670 for my archos + helmetcam + tv dock in in 2007

Aaron: Racechrono seems to work pretty well. I just downloaded it. Sweet! What GPS device do you use?

yeah it works really well..on flatter tracks anyway (haunted hills results were a bit mixed) ..i use a 10hz bluetooth gps from ebay

it doesnt..video quality of the POV is much better..the difference is that the archos isn't just a video recorder..its a full on media player that does a fair bit that happens to have a helmet cam attachment.

the pov, being purpose built..would be better suited if you were serious about video recording imo.

i paid $670 for my archos + helmetcam + tv dock in in 2007

ok, now we are getting closer to beer baron money. $670 is more like it. any advice on where and what to get to piece together a kit with a bullet cam and DV that records to SD or CF card?

ok, now we are getting closer to beer baron money. $670 is more like it. any advice on where and what to get to piece together a kit with a bullet cam and DV that records to SD or CF card?

i was actually looking at a previous post above with the DIY sandisk v-mate recorder + sony bullet cam from ebay and think its very reasonable..quality looks good too...thats if you can get these items still on ebay, etc.

Saw some of the guys samples

http://www.cullenrallysport.com/_mgxroot/HighQuality.mpg

http://www.cullenrallysport.com/_mgxroot/newcamera.mpg

and think that its great quality vs cost. only thing is i think he screwed up the aspect ratio that he recorded in..as the sony bullet cam's are not widescreen..if you have VLC or something change the aspect ratio on these videos to 4:3 and thats what you should expect..

if your hdd is mounted the right way (with the platters vertical, not horizontal), it should survive everything barring a latril impact.

i just shove mine in the glove box/center console surrounded by tshirts or whatever else thats soft you can shove in there to absorb sharp movement

Brad, when recroding on the track do you use the hard disc or and SD card?

I was looking at soemthing like this but everyone told me to saty away from the hard disc units as every bump causes it to skip and you loose anything recorded.

I use the HDD , the trick is not to hard mount the unit , put it in a paded bag and and wrap it around rollcage, seat, what ever you can , but have it dangling.

Brad

"how does it compare with the POV kit on quality, ease of use? spec? it's pretty close on price"

quality is good not far off DVD , very easy to use , soon as you plug in the camera it's ready to record via inline remote which also has the mic in it .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...