Jump to content
SAU Community

Recommended Posts

That is one of the better ones, but on gravel and with anti-lag the car is always going to be much louder. I still think the co-driver is too loud in comparison, I find myself turning it down as you speak.

Don't take it personally, you have a nice voice Timmy :)

I personally don't see the point of the RadCam, the reason why GoPro and Contour have sold 3,000,000:1 over Radcam is they are very small, very powerful and very easy to mount in just a few seconds. The RadCam is basically a fixed camera with a brick for a battery. Would be easier just to hire a film crew.

I personally don't see the point of the RadCam, the reason why GoPro and Contour have sold 3,000,000:1 over Radcam is they are very small, very powerful and very easy to mount in just a few seconds. The RadCam is basically a fixed camera with a brick for a battery. Would be easier just to hire a film crew.

Ben, if you're setting up a camera in a car how does size, weight and ease of install matter (within reason)? Not that the rad cam looks that onerous to me (I'm no expert mind you). Obviously it's better to have these qualities than not, but aren't image and sound quality, battery life, easy of use in car more important in this application? Seems the GoPro and Contour do not have the sound part nailed (so I've read on this thread, though have no personal experience). I guess I'm struggling to see how the downsides you've presented really are downsides. Also, does a lack of relative sales imply a product isn't good or perhaps that the application it's good in is limited compared to the other products? i.e. motorsport vs every other possible application?

Not trying to be arguementative but since this is a decision I'll be making soon, be good to hear more on your point of view.

The sound is the challenge and I don't know if there is a perfect solution - especially in rally environment.

In a normal track day environment definitely an external mic under the dash is the way to go. Even in something like the little Caterhams and our POV camera that worked a treat.

For Targa last year we ran dual mics in the GT-R. One under the dash and another clipped onto Matress's harness (but that meant no driver voice input). It was done this way as my old intercom only had audio in.

Last weekend at Mt Baw Baw we just ran with the new audio into the new Stilo and I don't reckon there was enough car sound - so next time will run dual cables, with one into the intercom and one under the dash and that might be bang on.

FWIW - I spoke to the guys at Protech yesterday and the new VBOX HD camera is out in April. I reckon that will be the bee's knee's motorsports camera (but will be around the $2K mark)

Ben, if you're setting up a camera in a car how does size, weight and ease of install matter (within reason)?

Setting up a gopro or contour can be done in literally 15 seconds, thats from approaching a random car to walking away. Suction cap it to any exterior surface or any interior window, adjust the camera angle and press power/record. Try doing that with a RadCam, its a 15min job that involves cable ties, race tape, etc and is 'generally' limited to interior footage only.

but aren't image and sound quality, battery life, easy of use in car more important in this application?

Thier is no off-the-shelf camera on the market today that will give you good sound when mounted externally however just about all cameras will give great quality video for the club-trackday user. Battery comes down to management, if you are sitting in the pits with the camera on for 15mins before you go out on track well yes you will probably run out of battery before a trackday is finished but they all come with chargers and a second battery is quite cheap to carry with you.

Also what are the weight limits for cameras and motorsport?

Setting up a gopro or contour can be done in literally 15 seconds, thats from approaching a random car to walking away. Suction cap it to any exterior surface or any interior window, adjust the camera angle and press power/record. Try doing that with a RadCam, its a 15min job that involves cable ties, race tape, etc and is 'generally' limited to interior footage only.

Thier is no off-the-shelf camera on the market today that will give you good sound when mounted externally however just about all cameras will give great quality video for the club-trackday user. Battery comes down to management, if you are sitting in the pits with the camera on for 15mins before you go out on track well yes you will probably run out of battery before a trackday is finished but they all come with chargers and a second battery is quite cheap to carry with you.

Also what are the weight limits for cameras and motorsport?

To claify the position on weights for cameras in cars. There is due out soon a set of CAMS guidelines for mounting cameras in cars. I know, beacuse I was a consultant on the project. Broadly speaking, the weight limit is 200 grams including mounts for each component, without special mounting requirements. Anything over that will need to be enclosed in a special mount. Cameras like the RadCAM HD20, GoPro, Contour, Drift, Replay XD1080 are all well under that weight, and will all comply.

No cameras are to be mounted outside or inside unless there is a substantial secondary tether connected to stop accidental release of the camera. I have over 10 years experience in fitting onboard cameras for TV etc and so cameras like the RadCAM are very easy to install and use. I did the onboards for the GT Series at Phillip Island for One HD last year and trust me, if they were that hard to fit, I wouldn't use them. I did 10 cars by myself and even had to change mounting position in between races. The camera can be mounted outside as the new cables are thin enough to be routed inside, allowing the driver to operate the camera. Audio is then sorted as the mic is located on the receiver, rather than the camera mounted out in the breeze. The RadCAM is the official camera of the ARC, V8 Utes, Bondi Rescue, Targa, the Bathurst 12 hour and the WRC Academy etc etc., so it must have something going for it.

Battery life is always an issue as we all forget to turn off cameras from time to time and flat batteries are the cause of more lost potential footage than I care to remember.

No date set for release of the new guidelines, but I am told it will be soon.

Sounds like CAMS are about to go wild with more restrictions once again. I've NEVER seen a camera come off in the last 4 years at ANY event I've been to. Internal, external - wherever. :rolleyes:

I can also tell you a ContourGPS, with suction mount, half of which is metal - is over 200g. I have one next to me right now...

Or does it mean camera 200g, mount 200g - so 400g total?

Sounds like CAMS are about to go wild with more restrictions once again. I've NEVER seen a camera come off in the last 4 years at ANY event I've been to. Internal, external - wherever. :rolleyes:

I can also tell you a ContourGPS, with suction mount, half of which is metal - is over 200g. I have one next to me right now...

Or does it mean camera 200g, mount 200g - so 400g total?

Let's wait until the guidelines are released, but my understanding is camera and mount is included in the weight. CAMS are quite right to expect a secondary tether on something held on by nothing more that vacum, and reliant on the user applying it correctly.

Benm, such unfounded hate for radCam and it's ilk. 15 minutes you state is laughable.

Radcam and others like it featuring a remote camera are actually easier to mount successfully than a GoPro. You can actually see a screen showing the view the camera sees, making accurate setup of the view MUCH easier. The lipstick camera uses a similar suction mount if you desire it, and the main body of the unit is simply attached to anything using the pouch and velcro straps, or even thrown in the cetre console of gloebox. If the main body and screen are out of reach, they supply a remote for record on/off.

With a GoPro you're sometimes guessing the view it's recording because you cannot stick you eye in its bloody lense (cheap-arse thing has no screen). I've thrown my back out trying to access the view lense of one, and trying to turn one on or off when strapped in and it's mounted between the seats of a race car is laughable.

I think Martyboy has given a pretty fair review, "I have over 10 years experience in fitting onboard cameras for TV etc and so cameras like the RadCAM are very easy to install and use. I did the onboards for the GT Series at Phillip Island for One HD last year and trust me, if they were that hard to fit, I wouldn't use them. I did 10 cars by myself and even had to change mounting position in between races. The camera can be mounted outside as the new cables are thin enough to be routed inside, allowing the driver to operate the camera. Audio is then sorted as the mic is located on the receiver, rather than the camera mounted out in the breeze. The RadCAM is the official camera of the ARC, V8 Utes, Bondi Rescue, Targa, the Bathurst 12 hour and the WRC Academy etc etc., so it must have something going for it."

GoPro's and their type have their place, but in my opinion, they're far from a good solution for race cars where the sound, and ease of use should be a high priority.

*** I'm comparing similarly priced units here, if you're loaded, there's even better, more expensive units available. But most DO require a bit more time to set up to get the most from them.

I've used a gopro and a radcam. And i'd never use a gopro again, hard to setup (if you care what is in frame), crap sound, hard to know if the bloody thing is recording when your strapped in(many missed stages in targa cause of this). I swap my radcam between cars pretty often, and change mounting locations during events (including exterior) with no problems.

Might as well chuck in a mini review/thoughts... Having used a GoPro couple weeks ago, and a ContourGPS

Both were ok, but not great and had their own issues.

GoPro - Cannot see where it's pointing. This is being fixed in the next model apparently which will bluetooth to a phone or device so you can see.

ContourGPS - Cannot see where it's pointing, although it does have 2 laser dots to at least help align. It does have a bluetooth application for Android, however I could not get it to sync with my 6 month old Android phone no matter how many times i tried so there are clearly inherrant flaws in the sync/software.

Battery life was also terrible.

- Both were easy to operate/turn on. GoPro a little more difficult initially, it's a simple case of pressing a button too long and turns it to camera mode rather than video. Once you understand this however it has very simple 2-button operation.

Contour is a slid-button operation once on. (took me 3-4mins to work out, didn't have user manual)

- Mounting took all of about 5 seconds either way. Suction makes simple.

- GoPro sound was non-existent it was that bad. It was mounted externally.

- ContourGPS sound was average at best. It was mounted internally

Ash did the GoPro have the full back on it or the one with holes, was the rubber seal in there?

There is a firmware update for the GoPro which allows you to record automatically once the camera is turned on, which is great for getting around the double press and moving into photo mode which was a pain.

Contour will sync with iPhone as well now.

GoPro has an expansion pack for LCD screen, can use on the HD and HD:2 and an extended battery. I've used the LCD pack it's great. Though does increase the weight of the camera...Though I did use it on the back of the car around Winton as it was find.

I have both Radcam and GoPro and i think the Radcam just edges it. The new GoPro with external mic could be a good thing, the picture quality in varying lights seems to self adjust better. The other negative on the GoPro is understandwing what the hell you are actually filming, a bluetooth link to your phone to adjust and setup woudl be a good feature.

Below is footage with a Radcam

You can see the open top car with wind noise, changing light conditions/sun etc is a problem for all in varying degrees. The other hiccup is youtube seems to kill the quality of the vid when you upload so again you lose some of the quality that the GoPro and Radcam have over POV

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...