Jump to content
SAU Community

Recommended Posts

Lee (RB25DETS2) had the same problem with his hks actuator, we tried everything, more gain, more pre-load, just spiked more and more so we ditched it for a 18 psi and it holds perfect now.

  • Replies 489
  • Created
  • Last Reply

Top Posters In This Topic

Top stuff!

Glad to see more people on E85! Best decision i ever made switching over.

But i have to agree the fuel economy is terrible, at WOP i swear i can see the fuel needle move lol

Totally damn frustrating. Car is ready to go back on the rollers but this fuel still isnt available to us up here and i cant get an answer as to when it will be.

This is Ipswich for gawd sake. Home of willowbank and qld raceway and more tuff streeters than you can poke a stick at.

The market is right here right now.

yeah this e85 is GOOOD stuff...

and the best part is that i have the power of a 3037 with the response of a 2835.... cake and eat it and so on

Sometimes i wish i'd bought the 3037 instead of the GT-RS.

But then i go for a quick spin and forget about it pretty quickly. :wacko:

You sure?

I've never heard of anyone making 280rwkw with a GT-RS on a 25...I thought it was past its capability, but hey, I'd love to be wrong :P

Blitz SBC Spec-R, 18psi but tailing off to about 16 (trying to find the problem)

Don't say that just yet, im gonna damn bloody try once this head gets here :wacko:

And he was/is the only one... i don't believe it was right personally as no-one has come close since

Yeah i swear he must have had a hidden shot of gas somewhere :)

Still, im keen to push mine as far as it can go. Should have every single thing done to it to help it make peak power other than a rebuild. Warlord's was probably the most a GT-RS has been pushed.

Just got word that theres a hipo workshop in brisbane selling it in 205 litre drums.

Only wants 460 dollars a drum.

lol

what a f*kstain! Who is it?

Noel can you use your persuasion powers, maybe talk to Neuman Petroleum at the next time attack?

Joe added a link to your thread in my Facebook group :)

Edited by dano4127
Sometimes i wish i'd bought the 3037 instead of the GT-RS.

But then i go for a quick spin and forget about it pretty quickly. :(

Well I had for ages favoured the idea of going GT-RS but eventually went the GT3076R, interesting difference here is I have never looked back :)

what a f*kstain! Who is it?

Noel can you use your persuasion powers, maybe talk to Neuman Petroleum at the next time attack?

Joe added a link to your thread in my Facebook group :)

Trust me I am trying Dano. I want this stuff bad.

Hmm I have had it for >2 years but if I remember rightly around NZ$2k at the time I purchased it. Runs an internal wastegate and is on stock manifold so all RELATIVELY straight forward/cheap to set up.

good result, but I would love to see a graph of what difference it made at the same boost. I know you're saying you couldn't run more boost with the 98RON, but it was only running 14psi at the top end with a spike to 21psi as it ramped onto boost. I would just want to see what gain the fuel itself made. same boost, but with more timing etc it can apparently take. as it is a lot of that gain would be from more boost (more air + more fuel = more power of course), and i'm a bit surprised that the most you could run was 14psi on 98RON.

anyway, enjoy the new power and sweet smelling, cheap fuel. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...