Jump to content
SAU Community

Recommended Posts

So for those who have orders in the first batch, what have you heard lately? I was told my car was being made last week, then onto a ship for three weeks (landing in Melbourne?) Has anyone been given other info? Anyone got a VIN number etc?

Getting close now :devil:

  • Replies 245
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I spoke with the dealer today, they had some training thing on last week in Melbourne. Apparently the Premium cars come with the Bridgestones (he was adamant) - quite a few people have asked for the bridestones instead and it was raised as an issue - but apparently cannot be done? Anyone confirm or deny?

That info sounds right. Aus spec production has only recently started. Three genuine 2009 Aus spec cars are in the country now but they were fast tracked for press. I'm sure the first customer cars will be on a boat soon.

The premiums do come with Bridgestones. You cannot just swap tires because Nissan just don't have any tires to swap you with. Also this has been a problem in other regions and not solved yet and probably wont ever be solved.

That info sounds right. Aus spec production has only recently started. Three genuine 2009 Aus spec cars are in the country now but they were fast tracked for press. I'm sure the first customer cars will be on a boat soon.

The premiums do come with Bridgestones. You cannot just swap tires because Nissan just don't have any tires to swap you with. Also this has been a problem in other regions and not solved yet and probably wont ever be solved.

Bugger about the bridgestones. Does anyone know if you can buy the Dunlops and what the $$ might be? I suppose it's too early to get them now, but just wondering.

the rims them selves have an extra lip on them to hold the tyre on while cornering so i would expect that they have a specific tyre that has been designed for the rim

also at each nissan dealership there is a specific skyline sales person and two specially trained mechanics who are the only people who can touch the cars

It's not that big of a deal though.

I was one of the people that asked about the Dunlops but it isn't like the Bridgestones are a BAD tyre. They just aren't as good as the Dunlops on a long track run from what I understand. But Tony Quinn did use the Bridgestones on Day 2 for Rally Tas and still managed to win and I also think you'd find over a single lap distance at most Aussie tracks there'd be bugger all difference between the two (but only time will tell). But other than for motorsport reasons there's no real benifit to the Dunlops over the Bridgestones and the reality is that shortly the Toyo's will be available and they should be better than both of them, so most motorsport guys will be opting for them anyways.

True, for the street most wouldnt/shouldnt care i reckon. I'll be doing some NSW sprints and need to decide between 20" bridgestone/dunlops, or spend bucks on 18" TE37's and go with the RE55's. I wouldnt know but hazard a guess the RE55's will crap all over the 20" dunlops/bridgestones, possibly by a second or two at OP/EC/WP, but i just don't know for sure. Has anyone run say dunlops SP600's on a circuit?

for road use the bridgestones are better. they are quieter, less prone to tramline and have superior wet weather performance. the only time and place the dunlops are better is on the track.

so unless you're buying your R35 for trackdays/racing/ralling then forget about it. just enjoy whichever tyres your spec 35 comes with. :P

Bugger about the bridgestones. Does anyone know if you can buy the Dunlops and what the $ might be? I suppose it's too early to get them now, but just wondering.

You can get the tyres from US, this guys will ship them

http://www.tirerack.com/tires/CompareTireR...amp;RunFlat=All

By the way I've ordered my (non premium) on weekend, it comes with Dunlops and no heavy speakers to lag around race track. Watch out Duncan. :D

Marek

You can get the tyres from US, this guys will ship them

http://www.tirerack.com/tires/CompareTireR...amp;RunFlat=All

By the way I've ordered my (non premium) on weekend, it comes with Dunlops and no heavy speakers to lag around race track. Watch out Duncan. :D

Marek

Awesome Marek! Btw I tried to find ot the difference in weight (between the base model and premium) but really couldnt get the specs. Anyway will be good to have another GT-R int e comp.

With tirerack, are you sure they ship to australia?

Got an update today. They are still hoping for the first batch of cars to be ready for delivery on April 1st BUT the cars still haven't left Japan (infact aren't even at the wharf yet) so it isn't conclusive they will be here for that date.

I know Nissan FG (vic) have 7 cars coming in this first shipment. The second batch at this stage isn't due until after July 1st which means only these first cars coming in April will be at the originally quoted price.

I saw the workshop for the R35's at FG too. Looks pretty nice and is only for use for R35's (was seperate to the rest of the workshop). Nice in pit hoist, freshly done floors and walls and all new equipment so they have spent some $$$ gearing up for it.

However - I did see the newly done disclaimer for these cars. Gone is the original 5 page one which has now been replaced by an 11 page one. This thing is much more in-depth on what will void warranty (pretty much everything) but even goes as far as listing specific things such as "boost increases over 10psi will void warranty on turbo's, and a/f ratio's above 12.0 will void warranty on engines". etc.

Still I care for none of that right now. I'm just impatient for these new few weeks to pass and the car finally get here!

Well that's very interesting to hear about the specifics on the agreement. I'd love to read that one.

As for tires, Beer Baron is spot on and neither is a horrible tire. The beading on the rim doesn't mean anything for replacing with another tire. Many aftermarket wheels have beaded rims. Runflat tires overall are not the best, too many compromises in my opinion.

18" TE37s with a semi-slick is a proven combination in the US where these things are cheap and therefore thrashed on the track. TE37's with a MT drag radial works great for low 10's too ;).

Got an update today. They are still hoping for the first batch of cars to be ready for delivery on April 1st BUT the cars still haven't left Japan (infact aren't even at the wharf yet) so it isn't conclusive they will be here for that date.

I know Nissan FG (vic) have 7 cars coming in this first shipment. The second batch at this stage isn't due until after July 1st which means only these first cars coming in April will be at the originally quoted price.

I saw the workshop for the R35's at FG too. Looks pretty nice and is only for use for R35's (was seperate to the rest of the workshop). Nice in pit hoist, freshly done floors and walls and all new equipment so they have spent some $$$ gearing up for it.

However - I did see the newly done disclaimer for these cars. Gone is the original 5 page one which has now been replaced by an 11 page one. This thing is much more in-depth on what will void warranty (pretty much everything) but even goes as far as listing specific things such as "boost increases over 10psi will void warranty on turbo's, and a/f ratio's above 12.0 will void warranty on engines". etc.

Still I care for none of that right now. I'm just impatient for these new few weeks to pass and the car finally get here!

Maybe there's are reason why they chose 1st of April.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...