Jump to content
SAU Community

Recommended Posts

I don't think that would be a problem. I can upgrade it to the latest profile, which is targeted at boost dropping issue with internal gate. PM if interested to go ahead.

If it hit a wall at 250 and pinged then I don't think holding 20psi through the whole rev range is going to really help anything. I'm going to keep searching and try find the issue

Unless a leaking PCV could be causing a boost leak and pushing oil out the failed cam covers ;)

Buy a new PCV to be sure, to be sure.

Unless a leaking PCV could be causing a boost leak and pushing oil out the failed cam covers ;)

Buy a new PCV to be sure, to be sure.

Ooh ooh anyone know the part number for the PCV hose on a 34? Completely off topic i know :P

Ooh ooh anyone know the part number for the PCV hose on a 34? Completely off topic i know :P

LOL What a lazy prick :P

Nissan 11810-AA500 - that's the valve. Dunno if you actually mean the HOSE.

LOL What a lazy prick :P

Nissan 11810-AA500 - that's the valve. Dunno if you actually mean the HOSE.

:laugh: yeah i know!

And YES i actually want the hose too!

lol that I cannot help with. I would have thought any old hose will do?

Useless :P

Maybe, i was just being lazy!

Cams are in. They are Tomei drop in 264 / 8.9mm lift. Now working with SS2 Alpha, Dyno tomorrow.

Driving them back from mechanics, the exhaust has a slightly different note. Haven't give to them yet, hopefully hitting 400rwkws+ while still making 20psi by 3500rpms.

cams.jpg

Don't know. I was at TAB having dinner with bunch of Oddies while the Mechanic doing his job. It was done at Springymotors south east of Melbourne.

Hate people whom junk yard shopping that buys 2nd hand junk that don't work, that is been cheap-skating on basic mods as injectors, afm and ecu, It puts Trents in to a mood and that held every one else whom's waiting to get their car tuned.

Unfortunately I'm one of the two person whom's asked to go home and come back next friday. Leaves me with some extra time building SS4 Alpha turbocharger.

Damn Stao, it's gotta be 3 hours back to your place in this traffic. Was a shame, I wanted to see what it could do.

Wasn't it you last week with the cheapskate injectors? :P

They are 650cc Bosch injectors and they are working properly. Its more due to the one ended fuel rail in the KIA. the other once cam out of them are Power enterprise 700ccs, way too big for idle on that car.

The VNT setup on the SS1PU is chocking the Rb25det down low, not sure if its ok for the SR20det as engine capacity is smaller. I'm reducing the compressor end down to 69mm from 74. which should match the turbine flow while picking up better response. My last tune for this month would be next friday and that will be the SS-4 VNT turbocharger. The new SS1PU will have to be trailed after Trent gets back from China.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...