Jump to content
SAU Community

Recommended Posts

I've built a a pair for Chequrered tuning's LS1 V8, that is mainly getting the advantage of running extra timing for the high comp V8. I'm awaiting on the manifold for my GTR, So I don't currently have a result for this particular turbocharger. Are you looking for some thing that suits a Rb20det?

How ever I have do have an result using the exact same compressor and turbine, except been in a VNT housing. You can reference to the ATR43SS4-Alpha model. That would give you an approximate peek power and boost to power ratio.

While I'm in here, I have twin GT-RSs on my RB2630 and the rear wheels are choking it up top, is there an option to fit a bigger turbine wheel ?

Just a quick update. I'm in the process of making a 55mm exhaust wheel for SR20det motor. That is a mm a side bigger then your GTRs turbine all around. I will doing some evaluations ready, they should be the solution for your current issue on the Rb2630 and pickup more mid / top rang torque also.

Haha oops, for some reason I thought they where 11 blade, was thinking of something else :/

How long till you start doing these and what would be a guesstimate of cost to rebuild two turbos with these wheels ?

Grinding shaft at moment, probably two weeks away. If you wish to send me the compressor wheel I can definitely build them with the new exhaust wheel.

Some updates. Those are videos sent in by John Reco, fastest lap SAU VIC track day last week. Fastest lap:

fronts.jpg
Hypergear 21U highflow turbo on standard manifold
Havoc custom pipework and exhaust
Chequred Tuning 300kw responsive tune E85
Motul Fluids 8100 15w50, Comp Gear Oil & RBF600
Tyrepower Frankston wheel alignment
4.3 Diff gears
285/30 R18 Yokohama Neova AD08R

  • Like 1

Should be able to customize turbine housings. Depending on what sort of car it is for.

comps.jpg

Further development into the ATR28SS Alpha Series based my S14 with a SR20det motor using BC S2 cams.

This is a base line for CBB SS2 Alpha version, Vnt is not current engaged. Final result of 302rwkws on 24psi P98 fuel.

power.jpg

boost.jpg

SS2 Alpha Base line compare to Standard SS2:

ss2vspower.jpg

Makes the same amount of power, but is slightly more responsive.

ss2vsboost.jpg

Base line Vs Garrett GT2871R in .64 rear:

powerv2871.jpg

boostv2871.jpg

Its currently making 190rwkws and 21psi @ 4000RPM. It drives pretty good the way it is. The goal would be matching the GT2871 curve without losing any top end.

  • 2 weeks later...

So I am helping someone make their RB25 Skyline go a bit quicker, so after much discussion the choice to go with an ATR43-SS2 was made - as soon as we nut out how to best pay across international borders we may have the first Hypergear turbo on NZ soil that I am aware of. Looking forward to checking one of these things out in person after all the discussion, and will be nice to have first hand experience of the SS2 :)

If I'm allowed I'll post results after we are done with it - will be internally gated, stock manifolds all around, BP98 on a stock internal RB25.

  • Like 1

Firstly sorry for being lazy. But what is the best direct bolt in turbo for an R33 gts on E85 shooting for around 400rwhp with as much response as poss. Or is it worth going external gate and or big dump?

Depending on how lenient the dyno is he will be getting about 340-370 hp around there, varies alot with dyno's.

Thats at 16-20 psi

I'll be tuning the internally gated one on BP98 with a Dynapack hub dyno, probably not as tough an audience as you guys are overall used to - though similar to some. Will probably go for around 18psi, but will see how knock limited it is and decide whether to go higher from there.

SS1PU Internal Gate will do it, I personally prefer to run an external gate because you can sneak in more timing

Thanks

Is the ATR43ss2 a lot bigger or ok for what I'm looking at? Don't mind going external gate, prob off exhaust housing.

This is for a track car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • Yes then it will turn on but I want the car features to work  
    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
×
×
  • Create New...