Jump to content
SAU Community

Recommended Posts

Great video at Winton, I like that my lines are basically the same as yours, yours are a bit tighter though, and I suspect cleaner :D

Interestingly your car does the same things mine does at the same points on the track, scrub wheels, tail happy etc. Though it's doing it all much faster!

Edited by ActionDan

Hey Guys

This is my vid from my outing at Lakeside Park on tuesday. It was my first time on semi's and my second sprint at LS, and my first time breaking the 60 second barrier as well. Thought I'd post up here to get some pointers from the guru's as to where I could cut some further time out of my laps and any other hints you guys have to offer as well :)

Thanks Guys :)

Nice work. What are you mounting the camera to? Have you got a half cage? Also keen to know what sort of power you're running in your 32!

Cheers

Scott

What sort of dollar are we talking for those? I just switched to RSRs from some old semis and ran 3 tenths faster which impressed me no end. I got these for $640 delivered, 235/R17s (On a Silvia so might be a bit small for a 33 with grunt).

That is part of it, also they didn't roll over on the sidewalls and physically look like they have more tread depth on them.

These have done 5 track days on the rear of the car and 5-6 on the front, plus a deca or two. 32-34 PSI.

The other pair are 5 track days newer, the 4 combine did a 1.25.98 at Sandown couple of weeks ago.

post-59171-0-90951900-1319065006_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...