Jump to content
SAU Community

Recommended Posts

Great video at Winton, I like that my lines are basically the same as yours, yours are a bit tighter though, and I suspect cleaner :D

Interestingly your car does the same things mine does at the same points on the track, scrub wheels, tail happy etc. Though it's doing it all much faster!

Edited by ActionDan

Hey Guys

This is my vid from my outing at Lakeside Park on tuesday. It was my first time on semi's and my second sprint at LS, and my first time breaking the 60 second barrier as well. Thought I'd post up here to get some pointers from the guru's as to where I could cut some further time out of my laps and any other hints you guys have to offer as well :)

Thanks Guys :)

Nice work. What are you mounting the camera to? Have you got a half cage? Also keen to know what sort of power you're running in your 32!

Cheers

Scott

What sort of dollar are we talking for those? I just switched to RSRs from some old semis and ran 3 tenths faster which impressed me no end. I got these for $640 delivered, 235/R17s (On a Silvia so might be a bit small for a 33 with grunt).

That is part of it, also they didn't roll over on the sidewalls and physically look like they have more tread depth on them.

These have done 5 track days on the rear of the car and 5-6 on the front, plus a deca or two. 32-34 PSI.

The other pair are 5 track days newer, the 4 combine did a 1.25.98 at Sandown couple of weeks ago.

post-59171-0-90951900-1319065006_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...