Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

i had to reformat my ps3 today. reinstalled gt5 (twice due to it being stupid). then had to download all the updates. fuck me that was a pain in the sphincter. about 2gb to download all of them. after downloading and installing half of them an error occured. even though it had installed 5 of the updates, because of the stupid way it does it, i had to start all over again. 2 of the updates that it had already installed were 608mb and 1192mb, which it had to download again. so it took about 5 hours all up to install and update. really wish they would allow you to download the game updates on a pc to the install via usb, like you can with system updates. would mean that you could just download each new update as it gets released and then if you have to reinstall the game you can just plug in a usb stick and apply all the updates from that.

cant say ive had an issue like that.

When switching consoles from my old YLOD model to my new one, it was a simple transfer (after getting the old one running again)

otherwise the only time ive had an issue of it dropping out is on my brothers PS3, when we installed GT5 we also had 4 other comps interneting at the same time and it had a little error in the last 3% of the updates (all of them):angry:, but it had only forgotten about 300mb the next time round. so no big issue

i feel your pain, just spend the last 6 hours ridding my PC of a virus, and attempting to recover lost data.

completly ruined my GT5 session, was half way through a dam race too >_<. but almost done, i'll be online racing for quite a long time tomorrow

so drop into the room and have a few races if you guys are bored. i'm usually in the Japanese GT300/GT500 rooms

cant say ive had an issue like that.

When switching consoles from my old YLOD model to my new one, it was a simple transfer (after getting the old one running again)

otherwise the only time ive had an issue of it dropping out is on my brothers PS3, when we installed GT5 we also had 4 other comps interneting at the same time and it had a little error in the last 3% of the updates (all of them):angry:, but it had only forgotten about 300mb the next time round. so no big issue

i have it drop out all the time when doing updates over wifi (router boots it off. router is a piece of junk. restarts itself every few hours). this time i had it connected via ethernet and it was when it was installing one of the updates that it got an error, not a connection issue.

i have it drop out all the time when doing updates over wifi (router boots it off. router is a piece of junk. restarts itself every few hours). this time i had it connected via ethernet and it was when it was installing one of the updates that it got an error, not a connection issue.

New Dlink router with Wi-Fi less than 100 bucks!!! win. i had to replace mine recently due to a lightning strike (which also fried the Network plug in my Comp :( )

New Dlink router with Wi-Fi less than 100 bucks!!! win. i had to replace mine recently due to a lightning strike (which also fried the Network plug in my Comp :( )

Coincidence! My router got fried by lightning strike last Friday night and then was pronounced dead on Monday.

On the plus side, Harvey Norman have 30% Cisco stuff at the moment so I grabbed an X3000 which is performing very nicely :)

  • 9 months later...

I know the new Vette is now available on a DLC pack, if that's your thing

I'm keen on finally getting the Spa circuit, and adding the Aventador would be good

But need to do my first ever system upgrade on the PS3 in nearly 3 years beforehand... as soon as my data allowance rolls over for the month, lulz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...