Jump to content
SAU Community

Recommended Posts

post up the Pre Christmas sale pics ben :D

Re the alloy sikaflexed on. if you need to remove them to you can easily like the original factory ones.

Plus, besides the weight of alloy, it's easy to work with.

Postman Damo and his black and gold sausage dog picked up and delivered some packages.

gallery_5985_3354_250903.jpg

mmmmmm titanium.

gallery_5985_3354_180939.jpg

nice welds

gallery_5985_3354_634443.jpg

even got a silencer.

gallery_5985_3354_902567.jpg

lightweight forged buddy club p1 qf. even got stickers and valves

gallery_5985_3354_898674.jpg

gallery_5985_3354_1066464.jpg

GTR plenum and throttle bodies.

gallery_5985_3354_1917615.jpg

gallery_5985_3354_1957247.jpg

gallery_5985_3354_1887453.jpg

Edited by sav man

im considering the rb26 plenum... purely for low weight, how are you planning on fitting the plenum?? adaptor plate to the head?? weld plates on the rb20 runners?? PM me if you dont feel like sharing with everyone :huh:

it's no secret. I'm making an adapter plate up, but the plate is the easy bit, we learn't on damos, that you also need to modify the coolent bar that runs under the throttles, and the thermost housing. Not the end of the world though. Oh, it won't save much weight if any, the 26 setup is heavy as f**k.

I'm pretty much doing it just cause i can, to get rid of a heap of piping, and side entry plenums are waaaay to expensive.

im doing it for the same reason :huh: and by low weight i mean, lower... as in, to the ground.. not high and doubled up over the engine.. it will be low slung and im hoping to bring more balance with the exhaust manifold. with the way the engine rocks when revved, all the weight gets thrown to the turbo side.

side entry plenums are almost no existent for RB20... and the ones that do exist are too ricey.. i like the factory look of the rb26 plenum and the noise of 6 throttles... and it can support 400kw... my rb20 will never ever see that much power.

are you not worried about having the injectors 20mm further away from the head??

it's only 10mm, making the adaptor out of 10mm plate alloy. Also the uuber expensive blitz one takes the injector 25mm out from the head, and from all accounts that was a good bit of gear.

awesome... i was considering making the adapter plates and weld them to the stock rb20 runners to bolt the throttle bodies to... but your way is much cleaner and less hassle.. i thought you would have had to use 20-25mm plate, hence why i didnt want to do it, but if its only 10mm then thats not so bad.

btw, i love your exhaust!

im doing it for the same reason :D and by low weight i mean, lower... as in, to the ground.. not high and doubled up over the engine.. it will be low slung and im hoping to bring more balance with the exhaust manifold. with the way the engine rocks when revved, all the weight gets thrown to the turbo side.

side entry plenums are almost no existent for RB20... and the ones that do exist are too ricey.. i like the factory look of the rb26 plenum and the noise of 6 throttles... and it can support 400kw... my rb20 will never ever see that much power.

are you not worried about having the injectors 20mm further away from the head??

If anything the further out that the injectors are the better. the more time the fuel has to atomise.

its one of thoes things that when you start looking you can see why we have built bens and mine the way we have. i started with the chop up the rb20 plenum option but that was way to complicated unless you was able to weld alloy yourself and wanted to do it that way. i made a plate that took about 5-6 hours to produce the first time around and most of that was the actual time setting up on jigs to cut the bits out.

Had you thought about the negative affects of the shorter runners on the 20? Bens planning on head work designed around this issue. my cars a different story as my engine is a 25de

the Plazman plenums are a grate option and have been proven over and over but they cost way to much for what they are. the price that we have been able to buy all the bits and make these for make them more worth while than the plasman.

yeh ive read as many articles as i can about the rb26 plenum on the RB20.. i will be doing as much headwork, and as much lightening and balancing as (financially) possible.. thinking solid lifters and big big cams (i know, its expensive).. so with a high high rev limit, and a high powerband, im thinking the rb26 plenum should be the go, as im not worried about bottom torque or street drivability.. the Zoom article showed the rb26 setup having great response, but lacking in the midrange compared to stock, but then picking up again later on. i dont know what turbo that was with though.

the sound of big cams and 6 throttles will make up for a lack of midrange.

Any pictures of the guts of the muffler. I have a trust ti exhaust, i grabbed the twin muffler version as its meant to be reasonably quiet..,but the ID of the rear muffler is only about 2.5" or so

I'm not very impressed with trust exhausts's, we lost 30rwkw with a 80mm trust peII on the Targa car. Our tuner says it's got restrictive mufflers.

i'll get some pics of the inside of mine tonight. Pretty sure mine is a custom build job, i got it's 2nd hand cheap ($880 delivered)

Any pictures of the guts of the muffler. I have a trust ti exhaust, i grabbed the twin muffler version as its meant to be reasonably quiet..,but the ID of the rear muffler is only about 2.5" or so

I didn't take any pics, but the muffler is 90mm through the guts

17x8 +28. the size restricted by the cadegory.

it should sound awsome. Just thinking what the good engine will sound like at 9000+ if i can be bothered building it.

the r33 is a far surperior car, and would be a good tarmac rally car if it was developed.

my car isnt too far off being tarmac spec...just needs the standard huffer and bonnet put back on....and oh I'd probably have to take off my silly rear wing too.

I thought about building it to targa specs...i just felt that it would be too heavy and lethargic with a standard turbo.

and not being on the Cams list didnt help matters lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...