Jump to content
SAU Community

Recommended Posts

jambo 09 was our best year ever.. running 8 passes in the gtr. with 6 7 sec passes..top qualifier with 7.83 at 179mph..

new pb of 7.78 at 183 mph with a 1.30 60ft...

winner of the modifeid compact class was a bonous..

congrats to paul running a pb of 9.4 with heaps left in it.

congrats to john in rh9 for running a pb of 10.1 at 140 in testing on low boost.. with a few gremlins at jambo ....but keep your eyes on this car it may surprise a few soon...

like to thank all my crew, harry,justin,scott and my canberra supporters ha ha..

cheers, mark

Link to comment
https://www.sau.com.au/forums/topic/286182-godzilla-motorsport-778-at-183mph/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

the little black duck was awesome...well done mate...top stuff.

that run was definately one of the straighter ones ive seen you do.

feel free to post up the drifter one.

drift and drag at the 1 event...who said drag racers can't drive.

awesome drive job mate...scary.

we are in the process of a wieght reduction program and looking at some aero dynamic options..but still would like to keep the cars look some what as a r32gtr...

also have a new custom turbo being fitted now for testing very soon...

keep you all posted..

cheers, mark godzilla motorsport..

we are in the process of a wieght reduction program and looking at some aero dynamic options..but still would like to keep the cars look some what as a r32gtr...

also have a new custom turbo being fitted now for testing very soon...

keep you all posted..

cheers, mark godzilla motorsport..

Sounds good, looking forward to seeing the times come down some more.

What did it weigh with you in it on the last runs, 1200ish?

Nice drifting too btw, still a fair bit of front drive being used at 1/2 track?

Rob

car is 3050lbs at the moment... so we can hopefully loose 150lbs...

we run 4wd the hole track it needs it for safety i believe..

cheers, mark

Sounds good, looking forward to seeing the times come down some more.

What did it weigh with you in it on the last runs, 1200ish?

Nice drifting too btw, still a fair bit of front drive being used at 1/2 track?

Rob

car is 3050lbs at the moment... so we can hopefully loose 150lbs...

we run 4wd the hole track it needs it for safety i believe..

cheers, mark

she's still a heavy one Mark, it would be good if you could get it down in weight , but whatever you do dont go making a painted fake front end on it

Hmm its about 45kg heavier than Heat Treatment's GTR, be interesting to see how much difference shaking some of that weight off would make. Fingers crossed its going to be another good year of GTR drag racing around the world :P

what is there weight. 2950lbs...with driver..

cheers, mark

Hmm its about 45kg heavier than Heat Treatment's GTR, be interesting to see how much difference shaking some of that weight off would make. Fingers crossed its going to be another good year of GTR drag racing around the world :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...