Jump to content
SAU Community

Recommended Posts

Ok, I'll be the first one to say, DON'T DO IT!

Those 'bling' wheels in my opinion don't belong on a car of this calibre, this car deserves the best motorsport wheel and it's hard to pass on the TE37. the work wheels will be considerably heavier and you will definitely notice your car feeling more sluggish.

This car is the epitome of a hardcore street/track car and in my opinion needs lightweight forged monoblock goodness.

I'd say you may also have issues getting them over the AP's aswell.

Another thing I don't like about these meisters is that they use the size spokes as the 18'' version, only the outer part of the rim is larger and in my opinion does not give the full 20'' look.

Anyway this my opinion and many may disagree, just thought I'd give my 2c worth......

P.S if you do decide to go ahead Matt I've got first dibs on the TE's!!!!

TE37s are getting overdone these days imho plus meisters look sick on 34s, proof:

IMG_01271.jpg

but matt, to run wheels that wide with such low offsets will require some serious tyre stretch+camber to get in the guards and considering the look youve gone for with the car, i dont think theyd suit. the above car has 10.5s rears (unsure of offset but doesnt look like -6)

however, points will be achieved for toughness

Ok, I'll be the first one to say, DON'T DO IT!

Those 'bling' wheels in my opinion don't belong on a car of this calibre, this car deserves the best motorsport wheel and it's hard to pass on the TE37. the work wheels will be considerably heavier and you will definitely notice your car feeling more sluggish.

This car is the epitome of a hardcore street/track car and in my opinion needs lightweight forged monoblock goodness.

I'd say you may also have issues getting them over the AP's aswell.

Another thing I don't like about these meisters is that they use the size spokes as the 18'' version, only the outer part of the rim is larger and in my opinion does not give the full 20'' look.

Anyway this my opinion and many may disagree, just thought I'd give my 2c worth......

P.S if you do decide to go ahead Matt I've got first dibs on the TE's!!!!

I know what your saying Jack but this car doesn't see the track so increase in wheel weight not a huge issue IMO... sluggish? with 400rwkw!? it might not feel quite as sharp but won't be that much of a difference

I agree with Pete, everyone has TE's, can't hurt to try something a bit different

but matt, to run wheels that wide with such low offsets will require some serious tyre stretch+camber to get in the guards and considering the look youve gone for with the car, i dont think theyd suit. the above car has 10.5s rears (unsure of offset but doesnt look like -6)

he has the wider Z tune guards up front so just the rears are a concern... the rears in that pic could be close to -6... heaps of dish there

can anyone confirm what offset needed to fit 10.5s on the rear of a 34GTR?

Personally, I love the tough look of the Work Meister S1.

But I certainly understand Jack's point regarding unsprung weight etc etc.

As mentioned TE37s, CE28s, LMGT4s (all of which I have owned) and other popular Volk Racing wheels are so overdone on BNR34s.

I am a wheel whore, therefore i am always looking at other exciting wheel matching for my car.

These were the original pics that got me hooked on the Meisters. This particular set was traded on this forum in 2008/09 and changed hands twice as far as I know. The set for sale in Sydney may very well be the same set of wheels transferring ownership again...

Looks almost Tonka (toy) tuff!

post-32660-0-81642400-1301041962_thumb.jpg

post-32660-0-80208600-1301041977_thumb.jpg

As always, I appreciate the input

Cheers

Matt

In agreeance with Pistol Pete, When i went for the SSR SP1R's on mine i had the choice of those and about 3 different spec'd TE's. Although i absolutely love the TE's they are getting pretty common same with GTC's and CR Kais are getting around a bit more. Yes all very sweet and tough rims but with that size and off set you can't go wrong!

Just got car back from Racepace. Verdict: I like the way the car handles now!

Boring photo of Hicas unit removed. Note 5kg weight reduction.

p3260068.jpg

Custom Racepace Hicas bar,retaining OEM tie-rods. Racepace logo is a nice touch.

Again, it's nothing exciting. Note 4" exhaust sits very close to rear differential housing.

p3260064.jpg

Cheers

Matt

Just curious Matt but how many bonnet's do you have? Ive counted two R tune nismos and a vspec 2 bonnet so far. Add that to your wheel collection and you must have a double bay garage for just storing all the gear to mix and match the appearance of your car! Im hanging out to see your "cleaning out the garage" sale thread in the parts section.

Just curious Matt but how many bonnet's do you have? Ive counted two R tune nismos and a vspec 2 bonnet so far. Add that to your wheel collection and you must have a double bay garage for just storing all the gear to mix and match the appearance of your car! Im hanging out to see your "cleaning out the garage" sale thread in the parts section.

those cars with the meisters arent his

I decided to read this entire thread start to finish meticulously,this was around 6pm WA time,here I am 8 hours later at 2am in the goddam friggin morning LOL.

That said it has been well worth the read and congratulations for such an amazing car,Racepace have done an exellent job,it truly is inspiring.

I decided to renad this entire thread start to finish meticulously,this was around 6pm WA time,here I am 8 hours later at 2am in the goddam friggin morning LOL.

That said it has been well wheorth the read and congratulations for such an amazing car,Racepace have done an exellent job,it truly is inspiring.

i started reading the first post on my ph at work.......no work got done...battery went flat ....raced back to my room to charge and continue reading ....the best post iv read ..

it was like xmas when matt brought new things... great job with the car matt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...