Jump to content
SAU Community

Recommended Posts

Just spoke to Burnsie...

he spotted a silver 32 GTR with BTR sticker...Nick??

R31 on sunday with an SAU sticker - 2 door, roll cage burnsie in his black 32 spotted ya's

Got the thumbs up & a big grin from "ITS 25T" (gun-metal 32 with cabon T wing and odd front bar) in Orange about 10 mins ago, I had a shit of a time turning right onto the main & managed to spit myself out infront of him safely... :D Hopefully he copped an eyeful of my "skyline nationals" sticker in the rear window!

Edited by B. J.
Just spotted a wine red R33 on the M2, he got on @ Pennant Hills Road, and got off the same exit as me @ Abbott Road in Seven Hills. Had what looked like an old "Akira" sticker in the rear window - haven't seen one of those stickers in ages, super dooper old skool!
nick that really rings a bell but I can't remember who it was?

Duncan, could it be DJ Shruggs?

Silver R33 with a wing missing on the Gt Western Hwy Blacktown at about 12pm. BB___

BBC71P it was me :D

Spotted WPN033 today gt western into hungry jacks past the cumberland highway, tried my best to give a wave dude.

You car is almost my twin you coulnt have missed it, ahaha.

Cheers

BBC71P it was me :)

Spotted WPN033 today gt western into hungry jacks past the cumberland highway, tried my best to give a wave dude.

You car is almost my twin you coulnt have missed it, ahaha.

Cheers

i saw you mate, haha i waved back. :banana:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...