Jump to content
SAU Community

Recommended Posts

Naw weren't me Kat. I shot down the M4 from Springwood but took the back roads home via Cumberland Highway and Pennent Hills Road.

Who's the imposter posting as me in a White R33 GTR? hehe.

And Yes, on a bad day Paramatta Road can be shockers! My first time to the SAU clubhouse took 45 mins from Homebush to Haberfield.

Spotted a white series 1 r33 this morning about 8:15 had a passenger in front (2 guys) - hume highway warwick farm, lansvale and carramar

Unfortunately you were acting like an absolute tool if your on here, speeding and diving through traffic to catch up and go past me...your not kimi and your not on a track some of the lane changes your were doing were down right dangerous....its because of guys like you us real enthusiasts get called hoons.

Keep it on the track mate, also you didnt impress me at all. I dont know if you were trying to race me or what but i aint no hoon

Fyi had it been a track:

3e0ecd48.jpg

http://www.youtube.com/watch?v=DUONPuLpLJ4

I would have put you in your place for being a hard c@#t

/end rant

Hey JDM34 are you always around rockdale? I always see a silver r34 and a white one, I'm a local haha lol.

Might be me, i live in the heart of Rockdale....though if its one parked on the street its not me because mines always parked in a disclosed underground carpark :ph34r: if you seen mine its either me leaving or coming home.

Edited by starwarz

Spotted the Maroon R33 GTST with 400R front bar in Albion Park yesterday.

Also gave a wave to someone at AP in a Black R33 GTST, I was in the White R33, black rims.

Mum spotted this in Warrawong.

med_gallery_87442_4726_623632.jpg

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...