Jump to content
SAU Community

Recommended Posts

On the F3 yesterday there was an accident involving a white r34 gtt, poor guy, the car was smashed from the front and back.

And about an hour ago I thought I saw 34GTV pass me on Lane Cove Rd near Waterloo Rd.

white 33 on saturday in gordon/macquarie i think...possibly exchanged glances through the small gap in my window haha

another white 33 on epping rd last night around 9pm.

Eric, black 34 could have been me, depends on time - and did you see the wheels + body kit?

passed a nice 34 nur ii sitting behind a gtr on james ruse about 6ish. 34 owner looked displeased with the traffic

That was me - and yea was in traffic for 1.5 hours

Did you see the R35 GTR? I was following him for a while.

Saw several Skylines out and about yesterday.

Bayside Blue GTR on Comenara Pkwy crossing Kissing Point Rd, a Black 34 GTT on Lane Cove Rd and a white R33 GTST on Paramatta Rd.

Black GTT could of been me if it was around 6:30ish that night

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...