Jump to content
SAU Community

Recommended Posts

So, more shit ordered for Brad to keep going on this for me...

Starter motor should arrive by Friday at my place for it.

Also need to give a big thanks to Chris from Craved Coatings, many moons ago I sent him a heap of crap and went "Do stuff with it yeah?", I did tell him that I had no rush for it, as it was going to be a long project, and I emphasised this (When you actaully want stuff quickly he turns it around quickly!) but I got my gear back, and it looks SUPERB!

I'll get some photos up of his stuff soon.

I've had Chris do a few bits and pieces now, and his work is ALWAYS superb, at good prices! Seriously, send him your shiznit for powder coating!

  • 2 weeks later...

So... I told you all Craved returned some parts to me... He did an excellent job...

254525_1929986243888_1069171597_32226276_1966664_n.jpg

I've also got the new ECU in... Just waiting on the loom so it can be wired up.

222964_1897951523040_1069171597_32181970_326131_n.jpg

I've also been playing with the headlights and trying to clean them up... Might have to send them away to be profesionally done though... Yay... More money... LOL

I also bought the starter motor that was required so Brad can start modding the steering rack...

I think he's lost his camera too :P

We did find out though, that custom extractors are the ONLY way to go... Yay... More money... LOL

From what Brad has told me, and others have seen as well, the Ls1 and T56 are in and mounted. Last I heard te mounts haven't been 100% welded as Brad was waiting on the starter motor to make sure he only had to mod the rack and not move the motor further.

Wirin loom should turn up to him in 2 weeks time and just need plugs put on it.

Once it's mounted I understand we'll then be waiting on the front half of the tail shaft to be made. We spoke and decided on a 2piece shaft.

  • 2 weeks later...

So, I gave myself a birthday present of a day off work, and decided to head up to take some snaps so Brad didn't need to worry with photos.

From under neath

260247_1970108686924_1069171597_32278776_759212_n.jpg

Holden thought of the R33 when they made this sump... It fits perfectly...

259939_1970109326940_1069171597_32278777_5271427_n.jpg

Supposedly a cat lives here...

254811_1970111286989_1069171597_32278782_3090950_n.jpg

I'm going to need to change this

253478_1970111847003_1069171597_32278783_830865_n.jpg

This will cause issues...

253436_1970110366966_1069171597_32278779_925595_n.jpg

See... They do fit...

251246_1970113447043_1069171597_32278789_5573734_n.jpg

Just...

251113_1970117807152_1069171597_32278808_5467164_n.jpg

Although, it does sit nice and low...

264440_1970116207112_1069171597_32278799_2163567_n.jpg

At least I can get to the gearbox bolts easily...

260579_1970120527220_1069171597_32278818_1558854_n.jpg

Because of how well the sump fitted the cross member, it's staying where it is, as you can see, it could be shoved back a bit, but that sump is such a good fit!

The shifter works out in nearly the standard location, slightly rearward, but because of the height of the box, the trans tunnel will need a slight mod around the shifter hole to allow the box to sit up all the way.

The back of the box still needs to go between 1 to 2 inches higher when it gets bolted up properly, so the motor will tilt slightly further forward. Even more clearance... :D

As to the rack, it actually needs to be moved to the drivers side a fair bit to make it fit. It's majorly in the way... A bit more obvious in person.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...