Jump to content
SAU Community

Recommended Posts

:P

the look shit

they are heavy

they look shit

build quality is shit

they look shit

offsets are shit

they look shit

they are heavy

they look shit

Has to make a comment about everyone's wheels.

Have you ever stopped to think...maybe the owner likes them?

+1

but it all comes down to the primary use of the car.

If its just being driven as a daily, 200kw-300kw wont do much good in peak hour traffic. Hence they spend money on cosmetics.

or you can spend it on both :P still need suspension tho. Apparently when I launch my sideskirt almost touches the ground and my rim gets hidden under my guards haha

Has to make a comment about everyone's wheels.

Have you ever stopped to think...maybe the owner likes them?

so... the owner has aids, and not the wheel?

or you can spend it on both :P still need suspension tho. Apparently when I launch my sideskirt almost touches the ground and my rim gets hidden under my guards haha
sure you can do both but its the way they start which defines the primary use of the car. If you were serious on track work lets say, you would spend money first on proper suspension setup (more than coil overs) than the way the car looks. Rb ryan mentioned preference on functionality as he has a diff view on the primary use for his car. Hella flush may look nice but the sacrifises are not worth it. This is an opinion after all so each to their own.
Has to make a comment about everyone's wheels.

Have you ever stopped to think...maybe the owner likes them?

not really... just stating my opinion.... heaps of people on 86dc rag on my ksev's wheels if it makes you feel any better :P

Yea I'm with you on that hellaflush is for show. Chuck the car on the track with 10 inch wide rims running 215's with massive camber n see how How it handles.

I'd say it'd handle better than a car with 7" wide wheels on a narrower wheelbase, a higher centre of gravity, tyres running at a lower tyre pressure with a lot of flex in the sidewall, and no camber or toe adjustments reuslting in poor cornering.

but apparently everyone in melbourne drives their skylines ready to jump on the track at the drop of a pin.

you'll find most guys who are concerned with stance and fitment pay more attention to suspension settings, so if they go on a track will change to better wheels and most definitely a realignment/readjustment of suspension.

that's what we do anyways, every single time we go to a track event, properly using a laser assisted alignment rack. how often do you "omg hellaflush is so shit on a track" arsemonkeys check your suspension?

you may find a lot of sau guys are intrested in mega kits with rims etc

just basic looks are ok, they seem to be more keen on increasing power and acceleration

nothing wrong with that, im not overlly a fan of all show and no go but your go needs to be relevent to your intended purpose ie, for me i dont need 300rwkw doest mean ill pay out on ppl with that, i prefer a complete package, looks + required amount of go.

plus i just dont like when people post bs about stretched tyres and blah blah

oh and not to mention standard r33's would be one of the ugliest cars nissan created

maybe I should stick some cards in my rear rims to see if I qualify as being 'hellaflush'.

BTW, spacers: aids or acceptable? I know quite a few people who run them, my front rims sit in a little far (probably +35 not +22 like the rears), and people keep telling me to get them, but I always thought they were dangerous and for the gays.

you need hubcentrics there ok i dont use them, i had them and didnt feel the same but heaps off ppl use them no problems so no they arent aids best advice is to get the right size/offset from the outset.

maybe I should stick some cards in my rear rims to see if I qualify as being 'hellaflush'.

BTW, spacers: aids or acceptable? I know quite a few people who run them, my front rims sit in a little far (probably +35 not +22 like the rears), and people keep telling me to get them, but I always thought they were dangerous and for the gays.

I got spacers in the rear.

It came with the car from Japan.

Save you from buying a staggerd set of wheels.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...