Jump to content
SAU Community

Recommended Posts

Just had some dero sounding kid offer me 2k and then explain why 2k is a good offer..

How did he explained that his offer is a good offer?

I'm very curious.

something along the lines of,

'I'll give you $2k for your car...it's a good offer because I've read your posts about all the problems you've had with it, and I know you NEED to sell it because you aren't allowed to drive it, and no one else seems to be buying it, so I'll give you $2k to take it off your hands'

rb20s are so damn gutless off boost..

never buying another rb20 r32.. and if i do, rip it out and go 25

lol start blaming your automatic box first champ. Learn to drive manual and the rb20 can be managed. Else go buy an automatic commodore, perfect car for you.

lol it went

would you take 2k?

me: no thanks man

guy: ohh cmon, 2k cash. its been forsale for like a week and its on ebay for a dollar..

me: errr with a reserve...

guy: yeah i can get a VX commo for 7k.. think about the 2k

me: okay.. you can leave 2k deposit and come up with 5k on pickup?

tooooot tooooot toooot

think he got mad lol

lol it went

would you take 2k?

me: no thanks man

guy: ohh cmon, 2k cash. its been forsale for like a week and its on ebay for a dollar..

me: errr with a reserve...

guy: yeah i can get a VX commo for 7k.. think about the 2k

me: okay.. you can leave 2k deposit and come up with 5k on pickup?

tooooot tooooot toooot

think he got mad lol

lolwut?

anyone know if the VSS on a 34 gtt is on the gearbox or on the diff?

so far ive had 4 trade offers. 3 of em for vy ss's and got 1 few days ago for a bmw 523i 1996 and 1K my way

thinking of just dropping the price to something ridiculous and be done with it

I have a 26 and a 20 with GT2860rs and tbh the 20 doesn't have that much less torque down low especially with the delicious torque converter. Maybe your 20 just needs some servicing?

This man is correct despite his love for 32 sedans*

*not that anything is wrong with 32 sedans

I have a 26 and a 20 with GT2860rs and tbh the 20 doesn't have that much less torque down low especially with the delicious torque converter. Maybe your 20 just needs some servicing?

doubt it.

pats right, its the auto box

nick- you want a v35 sedan?

Can't resist replying.. sorry for nerd speak :P.

The government investment to the NBN is capped at $26-27 billion dollars. Furthermore, this is an investment, not a direct cost.. as in, Australian's stand to get this money returned, with a net cost to the public of 0 dollars. The NBN is not a government department, Conroy has no say in it's day to day running, the most he really has to do with it is the legislation that goes through parliament. Mike Quigley is the guy who is behind the NBN and he's one of the most respected and experienced people, not incompetent like both sides of politics. "Labor" (note the lack of a u) aren't rolling out the nbn, the NBN company is, the exact same people the Liberal broadband plan was going to use. It was listed in the policy, the exact same people that Labor are using, are the same the Liberals wanted to use.

Not even sure where to start with this.. Most obviously, most of my traffic is volume limited, not latency driven. Are you aware in other parts of the world there is no 'cap' on downloads? Sure pwning noobs with 10ms ping is wonderful for stroking your ego but not the reason the internet gets investment. The NBN stands to greatly improve bandwidth for Australian customers making currently impossible tasks like TVonDemand (which is very popular in the US with my friends over there) achievable. It also opens up entirely new uses for the internet which in Australia we don't even think of. In any case most people are connected to adsl, and fibre does actually have a lower latency than adsl by a fairly good margin. A lot of the copper in Australia is so old that it needs to be replaced some of it is over 50 years old, there are stories of telstra techs trying to pick up copper cables and starts to crumble in their hands from age. Fibre speeds can be upgraded by replacing the hardware on either side of the connection, the fibre doesn't need to be pulled out to increase speeds. The speeds fibre will be able to reach in the future may even reach terabytes, all without having to replace the fibre, just the hardware.

http://forums.whirlpool.net.au/archive/1256080

No idea where you got that latency number from but i'm pretty sure we haven't broken the laws of physics just yet captain. I'd love to know though, cause having a latency half the time it takes for light to go to the US and back is pretty cool :).

Wireless is a last resort, there is FOUR HUNDRED TIMES the spectrum available in the infra-red portion of the electromagnetic spectrum used for fibre optics than there is in all of the radio frequency spectrum. That's just a fact of physics where the frequencies used for infra-red are many orders of magnitude greater than radio waves and subsequently there is far more spectrum bandwidth available. Only ultra-violet, x-rays, gamma rays etc have a spectrum advantage over infra-red fibre optics, but they have a nasty property of being ionising which destroys much of the matter that tries to contain them assuming you can contain them at all.

One of the key draw cards for the NBN is that Telstra IS GOING to be split. They have done such a bad job of supply Australia with decent backhaul that it is now significantly financially cheaper to destroy its monopoly by creating a new network :S. Thanks Mr Howard.

The Tasmanian NBN rollout so far has actually come out well UNDER budget.

Ps. yup Paul :). Although it is worth noting the NBN stands to greatly improve network access in Major Centres as well as regional.

TL;DR

Fibre optic is win? Everyone knew that :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...