Jump to content
SAU Community

Recommended Posts

boot2u.jpg

dmax boot and roof spoiler yes plz

only if your going the full look like this guy, id say gtr front bar and spoiler + lows is better

probably just knocked the cable going from the PTU to the coilpacks a bit. engine moves when under load, just enough to cause a break in signal.

yeh took it out this morning up an down the street full acceleration no issues, apart from shittty neighbours id suspect

i need a service plus my front pipe put on and my new tie rod ends and some new suspension bushes also new engine gaskets installed. soo... who wants to do it :)

Front pipes is an easy job if you have ramps. Tie rods are easily replaced too but will require an alignment. Engine gasket is heaps of work. I'm lazy lol

my niggas

had someone call sayin they have an S1 GMG r33, LSD coileys has a dent in the back quarter (where a pod will be fitted)

dude says one of the lifters is noisy and its auto.... soooo how hard is a manual conversion and how costly would it be to fix the lifters

my niggas

had someone call sayin they have an S1 GMG r33, LSD coileys has a dent in the back quarter (where a pod will be fitted)

dude says one of the lifters is noisy and its auto.... soooo how hard is a manual conversion and how costly would it be to fix the lifters

goddamn you're a deadset dropkick. hasn't buying one shitty auto and dreaming of converting it to manual taught you anything.

take the money you'd spend on the 33, add 1k to it and then buy a manual instead. rather than buy an abused auto and spend 3k converting it to manual.

seriously, you're living proof that Darwinian theory doesn't apply to humans anymore.

goddamn you're a deadset dropkick. hasn't buying one shitty auto and dreaming of converting it to manual taught you anything.

take the money you'd spend on the 33, add 1k to it and then buy a manual instead. rather than buy an abused auto and spend 3k converting it to manual.

seriously, you're living proof that Darwinian theory doesn't apply to humans anymore.

Well the r32 is hard enough to get rid of. And I need a car ASAP

Their bog slow and I have an auto license so I dont mind if it's auto or manual.

Another offer was for an 06 bf falcoon wagon lol

I'd rather buy a bike what can 4-7k buy you for the car a kit and some rims? :domokun:

Maturity kickin' in yo - shouldn't do the gtr up >_<

Just a bit of a personal question - you guys/gals that are 25 ish renting or got a house? or still living at home? and to add those that do have a house what age were you when you moved in and was it with a gf / wife / a Mohsen?

I'm still living at home myself but thinking of just saving in the next few years for a deposit, have 25k of commonwealth bank shares atm so it would help with the initial saving

26, 27 this year. Live with my inlaws, have been for about 5 years although I've been with my partner for 10 years. We bought land last year and will likely start building this year.

26, 27 this year. Live with my inlaws, have been for about 5 years although I've been with my partner for 10 years. We bought land last year and will likely start building this year.

Cool :thumbsup:

In other news, wanting to go to winton next month for sau championship - how hot can my engine oil get to safely? because I probably wont have oil cooler installed by then so was thinking of doing hard lap then 2 slow ones or something? or am I being to soft I do notice the gauge go up a fair bit during a hill run when i'm not even pushing the car that hard at all is 140 ish safe to be running on?

140 would be max. But u may find it a bit cooler on the track with 2 laps. We r talking about 5mins max on load. Not. 10-15 min moutain run.

No cooler is not ideal, but safely safely as she goes would be the plan. Catch tank for gtr is what u want tho, from what ive seen the stockers blow a bit (5-6 have done this, u end up with oil dripping from the pods)

My gtst never got over 100deg with the cooler.

Hamish that is hawt!!!

Also i run down a smurf, ran him through the blender and he is know lubing my gearbox :P

Skyline possibly gets inspected this Sunday when I get back from DECA. I say possibly. Hopes are not up too much given track record and I'm starting to sound like Mohsen. Please cross your fingers for me :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...