Jump to content
SAU Community

Recommended Posts

FnF5 was pretty good. one or two anti-ricer quotes from the Rock shows they're over the ricer spec look from the previous movies and also alot more action, nice.

i think i may have fallen in love with an american car :/

oh and that biker chick aswell...

Even Paul walker was poking fun at chromies and spinners.

Also, that C10 GTR :O

Yes, have been reading few people commenting on how good FF5 is.

Sequels are usually horrible.

Will have to wait for DVD to come out.

I think this was a case of, sequels are horrible but if you make enough of them you'll eventually make a good one lol. That said, I enjoy the F&F movies...easy entertainment and the character development is good even if the stories are wack.

multi function display display?

Maybe he flogged the MFD display for cash because he couldn't exactly visit an ATM machine while on the run from the law.

Makes sense....Has Tej and Roman Pierce from number 2, Han from Tokyo Drift who in that movie had worked with Dom in the past...

But then it's got the chick from 4, and Letti is already dead (from 4) so this is a prequel to 3, but a sequel of 4, which makes 4 a prequel of 3 as well?

So 1,2,4,5,3?

Letty isn't alive for this movie, so it fits where it's supposed to, after the fourth movie.

Tokyo Drift confuses everyone because it was the third movie to be released, but the events in it take place long after all the other movies. I think it started life initially as a spin off, but now they've decided to incorporate it late down the track as part of the main franchise storyline. For now they're just making a bunch of movies that take place between the 2nd released movie and Tokyo Drift. Bit like a messed up version of Star Wars.

This one is a Tokyo drift prequel.

Lol at getting gassed by carbon monoxide. Mmmmmmm... Premium

lol car drove so much better without that silencer. Destroyed an XR5 turbo and I showed him how to properly launch a GTR ;)

Have you seen the movie? Her body is tiiiight. Your loss :P I'll take her, thanks.

Bit early in the morning for you?

I never said he body wasn't tight - just her funbags, which will look like half eaten bags of rice when unleashed

She looked real good in the movie...in that pic her face looks a bit manly? Kinda looks like a chick version of Jeremy, maybe that's why you find her attractive bud :P

And are talkin the whole fried eggs nailed to a fence kind of sagging?

Until you get the top off and that rack hits her belly button - you can already tell it's in need of hefty restraint

A fellow connoisseur, Im impressed.

The sag is evident by the shoulder to approx nipple distance it's far to low to qualify for perkyness. Ask any man, any real man he'll tell you

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...