Jump to content
SAU Community

Recommended Posts

AMS Smash The 9 Second Barrier at TX2K10

March 21st, 2010 Goto comments Leave a comment

After beating out all the other competitors in the dyno competition, AMS have driven this SR850 tuned R35 GT-R to a worlds first 9 second ET at Lonestar Motorsports Park on their first run of the day!

They went on to run a string of 9 second passes with the best ET being 9.89 @ 145 even after hitting the rev limiter in second. The best mph of the day was 146.96 mph which you can see in the timeslip in the gallery below.

To get there, the car runs an AMS SR850 upgrade package which includes:

AMS upgraded bolt on turbo’s

Upgraded actuators

AMS 90mm downpipes

AMS 90mm Resonated midpipe

AMS 90mm exhaust

AMS Front mount intercooler

AMS 3″ intercooler piping

HKS bov’s

AMS Large MAF intake pipes

AMS fuel System upgrade

Cobb AccessPORT

AMS Custom Race gas map (unleaded 109 octane Race gas)

With these mods the car is putting 765awhp and 738 lbft of torque to the ground. Impressive stuff and big big numbers from bolt on upgraded turbos. What will we see when AMS’s custom cast manifolds and even bigger turbos get bolted up to Chuck’s car?

Taken from boostcruising.com.

Edited by NoFX_Hardcore
Link to comment
https://www.sau.com.au/forums/topic/313109-worlds-first-9-sec-r35-gtr/
Share on other sites

They didn't do anything to the gearbox?

We worked with AMS in the US on this one and supplied them -

WR35TMVS our new high load 'Super GTR' transmission fluid

WR35PS GR6 Piston Seals

WR35CC GR6 Gear Fastener System

WR35CC-L GR6 Clutch Retaining Clips

This is not an advertisement, just pointing out there was some Aussie know how in that 9 second pass :ermm:

AMS Smash The 9 Second Barrier at TX2K10

March 21st, 2010 Goto comments Leave a comment

After beating out all the other competitors in the dyno competition, AMS have driven this SR850 tuned R35 GT-R to a worlds first 9 second ET at Lonestar Motorsports Park on their first run of the day!

They went on to run a string of 9 second passes with the best ET being 9.89 @ 145 even after hitting the rev limiter in second. The best mph of the day was 146.96 mph which you can see in the timeslip in the gallery below.

Please don't shoot me but isn't 9.89 sec actually 10sec in anybody's language other than a drag racer's? :)

I am fascinated how everybody calls an 11.99 sec pass an 11 sec achievement! No, it is not. That minor detail of 0.99 sec is 55m difference or 12 car lengths at 400m mark.

It does sound a lot better in the pub, I do admit.

Edited by GT-Ricer
It's an ET bracket. Ie 9.00-9.99, 10.00-10.99, 11.00-11.99.

when someone refers to "running 9's" they are refferring to breaking the 10.00 bracket....Circuit racers even do it :cool:

I would call it "running sub-10's" but it is a matter of convention, I guess. Thanks.

I was given one of these official RH9GTR stickers by Danny (of JMS fame) back in

2002 when I raced at the first Drag Combat meeting at Willowbank when the HKS

drag GTR was there running 7s. It was a huge honour to even have one of these

japanese stickers back then & there was no way I was going to stick it on my GTR

till I had the time to back it up. I ran a 10.9 second pass that day & waited till a few

months later back in Adelaide before I proudly displayed it on my windscreen after

running my first of many nines. (best I got back in those days - now over 7 years

ago - was a 9.45 @ 145mph)

All these years later, the fact that an R35 GTR can run nearly as fast with "light tuning"

is just astromonical. We spent hundreds of thousands of dollars to run those times back

then & there was no way our GTRs were street legal. Street drivable - sure, no problems.

My car was still "on the street" with Holinger, perspex windows, full cage, & 1 seat!!!

Awesome to hear that an R35 has cracked the sacred nines......... but dont be fooled.

There will be blood, sweat, & tears to keep it there. All those who see the number "9"

& take it with a pinch of salt - think again. The difference between 10.1 & 9.8 is huge.

There will be broken engines, clutches, etc etc. Mark my words....................

been there..done that.. Good luck trying to keep up with them.

A whole new generation of cheque book racers has emerged.

I will stick with my detuned 9 second R33 now turned into mid teens circuit racer

& leave my R35 as it is for fun & value factor.

Congratulations to AMS for doing it, keep up the good work.

Be interesting to see if someone will follow in their footsteps here in Australia.

Maybe the Willall R35 if we ever get a bloody Drag track again in SA?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...