Jump to content
SAU Community

Recommended Posts

4th gear stopping before limiter. I have alot of mechanical sympathy :)

Limiter is 8k. I like my stock rod bolts non stretched :D

Hmm. Something is up. 4th at 8000 RPM is 235 km/h and you're going to 190 ish km/h which is 6400 RPM. :S

Could the road speed on the dyno be wrong or something?

It's only my gay 4door gtt that needed so much fuel system work

But hey Can't complain with 367 @the wheels

At least your gay gtt runs ya kent :P stupid flex fuel!!

Nice result so far! Though to be fair I'm not sure if the PT6262 will really be showing its mettle yet, have you had any stock RB26 with a GT3582R on E85 on that dyno? That would make for a very interesting comparison

No i havent. This is the first single on rb26 on this dyno.

I wish i had a forged motor so i could run 35psi. I think it be close to 500kw

took it for a cruise to get some pizza. Without finishing the tune down low it drives very nicely. Below 3 very little boost. Above it picks up nicely.

So are the Precision turbos their own CHRAs or common with Garret. I am looking at either a FP73HTA with one of these housings but also considering a Precision turbo...but makes life easier it i can run one of these rear housings

http://www.atpturbo.com/mm5/merchant.mvc?Screen=PROD&Store_Code=TP&Product_Code=ATP-HSG-075&Category_Code=

Has anyone worked out the rpm vs speed yet..?

How fun would that turbo be on a 3lt

PT6266 would be more fun :D There are quite a lot of Supras running them, they seem like a pretty brutal all around setup.

Off topic, Jez u get the pic etc? I have the same issue as Kurtis :(

Hey buddy, yes i got the pic. Very dissapointing i was sort of hoping it was an odd issue with Kurtis's car, but if its happened on a different car with another workshops setup makes it very annoying. Hopefuly warranty wont be an issue.

Txt sent

How does the turbo sound when your up it Jez?

I've been told they are rather quiet compared to most singles...

On the dyno from in the car with headphones on i couldnt really tell. U can definately hear it spool up like a jet when inside the car but i havent been incar with a similar setup so cant compare.

No i havent. This is the first single on rb26 on this dyno.

I wish i had a forged motor so i could run 35psi. I think it be close to 500kw

took it for a cruise to get some pizza. Without finishing the tune down low it drives very nicely. Below 3 very little boost. Above it picks up nicely.

No prob Jez , just put it onto mine and see what it will make :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...