Jump to content
SAU Community

Recommended Posts

Ok 5558 on built sr20 is now run in. Boost was uncontrollable due to a mixture of incorrect wastegate spring and a loose block off bung in the side of wastegate.

Went for a quick roadtest to check boost pressure with 8psi spring and its running 14psi. With a 4th gear foot flat 2500rpm pull was cracking gate at 3500-3700 (14psi)

Will tune as soon as i get some time

Ordering from the US is always better for service IMHO.

I used Real Street Performance on a few occasions and delivery was about a week on all orders. There was one odd time when they couldn't ship an item because it was missing a piece from the MFG (the value of non drop ship vendors). That was rectified fairly quickly by the vendor, the supplier was a little slow though and I ended up taking a payout instead. Item arrived at my door, missing the said gasket, within days of telling them to send as is.

They also sell PT's and pricing is as competitive as it gets.

6466 is now on the manifold, and i am now looking forward to cutting myself to bits doing the pipework lol! Also, just an FYI for you simon, you may have trouble with the outlet on the turbo if mounted on the greddy manifold as mine sits rearward moreso than the greddy items, so pipework may have to face directly downwards and do a 140 degree turn.

6466 is now on the manifold, and i am now looking forward to cutting myself to bits doing the pipework lol! Also, just an FYI for you simon, you may have trouble with the outlet on the turbo if mounted on the greddy manifold as mine sits rearward moreso than the greddy items, so pipework may have to face directly downwards and do a 140 degree turn.

Pics would be handy :)

6466 is now on the manifold, and i am now looking forward to cutting myself to bits doing the pipework lol! Also, just an FYI for you simon, you may have trouble with the outlet on the turbo if mounted on the greddy manifold as mine sits rearward moreso than the greddy items, so pipework may have to face directly downwards and do a 140 degree turn.

Pics of super snail!!!!

Sort your line out?

just waiting on a 12mm metric to -3 adaptor and i will have the oil lines sorted. The pressure pipework is going to be the next interesting part. The thing looks small compared to the 78-33d. It only just fits between the cam covers and the strut tower lol

Hey you guys with precision v-bands, re- the 3" outlet to dump pipe, -the v-band flange welded to the turbo doesnt have a seat for the female flange and the Performance Exhaust at Northmead guy told me I need to get a female flange milled to suit with the clamp and my turbine flange because most of the time the clamps are too wide and the dump has play in the joint . He said it will fit first time but not after if I just get an off the shelf vband flange kit. Is that correct and what you guys doing about that? Where and what size T3 spacers you using, theres some 11mm ones on ebay, mine is a 5558 to go on stock rb25 mani- low mount.

Last question- oil feed and return, any suggestions on fitting sizes and line lengths? Or just let the tuner (unigroup/jem etc) sort that out..

And how much u guys paying for fabrication work, and any recommendations? Pm me if you dont wana post on here, thanks :)

Edited by rondofj

I can preeeety safely say, if its unigroup, let them sort the oil line for you. The 6466 i have was supplied with a machined V-Band flange, looks the goods and mates up 100% primo. I suggest talking to the unigroup guys and leaving it in thier capable hands mate :)

Thanks man, ur lucky you got a flange n clamp supplied as the precision ones are different in size to regular vband flanges and dont seal properly according to the exhaust guy and on the web, can anyone else with this 5558 or other 0.63 vband turbo please tell me where they got their dump flange n clamp from?? And any pics of how the gates welded to the turbine? Thinking if i should point the gate sideways towards the firewall or up upwards like a hat. Turbo will be Low mount on stock rb25 mani

Edited by rondofj

Don't be stupid Paul, there are no compressor maps so they are rubbish.

Lol, not what I said... they are your words. But continue to misquote me to the benefit of being an internet hero.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...